| General |
| Degree of protection | tested for arc flash - |
| Certification | PSA Regulation (EU) 2016/425 - |
| Box test | 423 kJ/m² |
| Class | 2 - |
| ATPV test | 32,8 cal/cm² |
| Size | 10 - |
| Inner material | soft leather - |
| Outer material | breathable materials - |
| Arc fault protection class (box test 7 kA / 0.5 s – single-pole) | APC 2 |
| Arc energy (Warc or WLBP) | 320 kJ |
| Arc Rating – ATPV (Open Arc Test) | 32.8 cal / cm² |
| PPE category (NFPA 70E) | PPE 3 |
| Total length | 325 mm |
| Gauntlet length | 115 mm |
| Size (international) | 10 (XL) |
| Material (glove palm) | Siliconised calf grain leather |
| Material (glove back) | 100% Kevlar® interlock knit |
| Material (sewing thread) | Kevlar® |
| Standard | IEC 61482-1-2; IEC 61482-1-1; EN 388, EN 407 |
The DEHN protective glove APG 10 is an arc fault-tested glove from the DEHNcare product range, specifically designed for maintenance and repair work on electrical installations. It serves as personal protective equipment (PPE) and is intended for use in environments with increased risk of thermal and mechanical exposure, particularly from arc faults. Certification is carried out in accordance with the requirements of the PPE Regulation (EU) 2016/425, which governs the placing of personal protective equipment on the market. The glove is available in size 10 and offers a balanced combination of protective performance and wearing comfort.
Applications
This glove is intended for work in electrical engineering and the energy supply sector, particularly for maintenance and repair tasks on electrical installations where the risk of arc faults exists. It protects hands from thermal exposure caused by arc discharges and also provides a certain level of protection against mechanical stress. Applications include industry, energy supply, building technology, and maintenance of high-voltage installations.
Functions and Features in Detail
The glove features a soft leather inner layer that enables good tactile sensitivity and supports hand movements. This is particularly important for precise tasks requiring high touch sensitivity. The outer layer is made from breathable materials, ensuring high wearing comfort and reducing moisture buildup inside. The material combination ensures a balanced trade-off between protection and freedom of movement.
Technology Explained Simply
The protective glove has been tested according to standards IEC 61482-1-2 and IEC 61482-1-1. The Box Test according to IEC 61482-1-2 yielded a performance of 423 kJ/m², corresponding to Class 2. This means the glove can withstand a certain energy load from an arc without losing its protective function. The ATPV Test (Arc Thermal Performance Value) according to IEC 61482-1-1 resulted in a value of 32.8 cal/cm². This value indicates the energy that can be transferred to the material’s surface before thermal injury occurs. Both values confirm the glove’s protective performance during arc events.
Compatibility and Accessories
The glove is designed as a single item for use in PPE systems. It can be combined with other protective equipment such as safety goggles, safety helmets, or protective clothing to create a complete protection concept. There are no specific accessories directly associated with this model, as it is a standardized protective glove.
Installation and Mounting
The glove is worn directly over the hand and requires no additional mounting or installation. The fit is designed for size 10, with precise adaptation to hand shape ensured by material selection and construction. No tools or additional components are required for use.
Operational Advantages
The DEHN APG 10 offers high protective performance combined with good handling. The combination of breathable materials and soft leather ensures high wearing comfort, even during extended use. Certification according to EU PPE Regulation (2016/425) guarantees compliance with legal requirements for personal protective equipment. The tactile sensitivity allows for precise work without compromising protective performance. The protection class 2 according to IEC 61482-1-2 and ATPV value of 32.8 cal/cm² make this glove a suitable choice for work with increased arc risk.