DEHN 785797, EAN: 4013364124936

DEHN 785797 APG 9 Arc Flash Glove Size 9

Tools > Safety & Workwear Equipment > Gloves

DEHN 785797 APG 9 Arc Flash Glove Size 9

Lieske Part No. 722794
Mfg Part No 785797
EAN-Code 4013364124936
Manufacturer DEHN
Here only 149,53 EUR
177,94 EUR incl. VAT

Further information for DEHN 785797 APG 9 Arc Flash Glove Size 9

General
CertificationPSA Regulation (EU) 2016/425
Size9
Inner sidesoft leather
Materialsbreathable materials
Box test423 kJ/m²
ATPV test32,8 cal/cm²
Arc fault protection class (box test 7 kA / 0.5 s – single-pole)APC 2
Arc energy (Warc or WLBP)320 kJ
Arc Rating – ATPV (Open Arc Test)32.8 cal / cm²
PPE category (NFPA 70E)PPE 3
Total length315 mm
Gauntlet length115 mm
Size (international)9 (L)
Material (glove palm)Siliconised calf grain leather
Material (glove back)100% Kevlar® interlock knit
Material (sewing thread)Kevlar®
StandardIEC 61482-1-2; IEC 61482-1-1; EN 388, EN 407
The DEHNcare APG 9 is an arc fault-tested protective glove, specifically designed for maintenance and repair work on electrical installations. It serves as personal protective equipment (PPE) and is certified in accordance with the PPE Regulation (EU) 2016/425, which governs the placing on the market of protective equipment. The glove provides protection against thermal and mechanical hazards that may occur during electrical work, particularly in the event of an arc fault. The inner side is made of soft leather, which enables good tactile sensitivity and supports handling of fine components. The use of breathable materials ensures high wearing comfort, even during extended periods of use.

Applications
This glove is intended for use in electrical engineering, particularly for maintenance and repair work on electrical installations where there is a risk of arc fault. It is suitable for professionals working near live electrical conductors or energized components. Certification under (EU) 2016/425 ensures that the glove meets European PPE requirements and is approved for industrial use.

Functions and Features in Detail
The DEHNcare APG 9 features an inner side made of soft leather, which enhances tactile sensitivity and supports precision when handling small or delicate components. The outer layer is designed to resist mechanical stress and thermal exposure, particularly in the event of an arc fault. The use of breathable materials ensures a comfortable wearing sensation, as moisture is effectively transported away and hands remain dry.

Technology Explained Simply
The protective glove was tested, among other methods, according to two internationally recognized arc fault protection testing procedures: the Box Test according to IEC 61482-1-2 and the ATPV Test according to IEC 61482-1-1. The Box Test resulted in a Class 2 rating with a value of 423 kJ/m², indicating the material’s ability to absorb and slow down thermal energy during an arc. The ATPV Test (Arc Thermal Performance Value) yielded a value of 32.8 cal/cm², indicating the energy level at which the protective effect of the material begins to break through. These values demonstrate the glove’s protective performance against thermal exposure during an arc fault. Protection Class 2 according to IEC 61482-1-2 is suitable for work involving medium to high arc energy.

Compatibility and Accessories
The glove is designed as a single unit for use in electrical engineering. It is supplied in size 9, which corresponds to a standard size for work gloves.

Installation and Mounting
The glove is worn directly over the hand and requires no additional mounting or installation. It is immediately ready for use after being put on. The fit is designed to conform well to the hand shape and enable secure handling.

Operational Advantages
The DEHNcare APG 9 offers a high protection standard against arc faults, combined with good tactile sensitivity and wearing comfort. The breathable materials ensure a pleasant wearing sensation, even during prolonged use. Certification under (EU) 2016/425 ensures compliance with European PPE requirements. The combination of mechanical strength and thermal protection makes the glove suitable equipment for professionals in electrical engineering.

Protection Type
The glove is designed for use in environments with arc fault risk. Testing according to IEC 61482-1-2 (Class 2) and IEC 61482-1-1 (ATPV 32.8 cal/cm²) confirms its protective effect. The materials used are selected to resist both mechanical and thermal stresses. The inner side made of soft leather supports tactile sensitivity, while the outer layer ensures protection against arc energy.

Size
The glove is available in size 9, which corresponds to a standard size for work gloves. The fit is designed to conform well to the hand shape and enable secure handling.

Certification
The glove is certified according to the PPE Regulation (EU) 2016/425, which governs the placing on the market of personal protective equipment. This certification ensures compliance with European PPE requirements and enables industrial use.

Materials
The inner side is made of soft leather, which enhances tactile sensitivity. The outer layer is made of breathable materials, which ensure wearing comfort.

Application
The glove is intended for maintenance and repair work on electrical installations, particularly where there is a risk of arc fault. It is suitable for professionals in electrical engineering who work near live electrical conductors or energized components.

Wearing Comfort
The use of breathable materials and the soft leather inner side ensures high wearing comfort. The gloves are designed to be comfortable even during prolonged use, without causing hand sweating or restricting movement.

Tactile Sensitivity
The soft leather inner side enables good tactile sensitivity, which facilitates handling of fine components and sensitive parts. This is particularly important for precise work in electrical engineering.

Arc Fault Protection
The glove was specifically developed for use in arc fault risk environments. Testing according to IEC 61482-1-2 (Class 2, 423 kJ/m²) and IEC 61482-1-1 (ATPV 32.8 cal/cm²) confirms its protective effect against thermal exposure during an arc. These values are critical for evaluating protective performance in electrical engineering.

Certification under PPE Regulation (EU) 2016/425
Certification under (EU) 2016/425 ensures that the glove meets European requirements for personal protective equipment. This is a prerequisite for industrial use and market placement within the EU.

Size 9
The glove is available in size 9, which corresponds to a standard size for work gloves. The fit is designed to conform well to the hand shape and enable secure handling.

Soft Leather Inner Side
The inner side is made of soft leather, which enhances tactile sensitivity and supports handling of fine components.

Breathable Materials
The use of breathable materials ensures high wearing comfort, as moisture is transported away and hands remain dry.

Box Test according to IEC 61482-1-2 (Class 2, 423 kJ/m²)
The Box Test evaluates the material’s ability to absorb and slow down thermal energy during an arc. A value of 423 kJ/m² in Class 2 indicates high protective performance.

ATPV Test according to IEC 61482-1-1 (32.8 cal/cm²)
The ATPV Test (Arc Thermal Performance Value) indicates the energy level at which the protective effect of the material begins to break through. A value of 32.8 cal/cm² confirms protective performance against thermal exposure during an arc fault.

Application in Electrical Engineering
The glove is specifically designed for maintenance and repair work on electrical installations, particularly where there is a risk of arc fault. It is suitable for professionals in electrical engineering who work near live electrical conductors or energized components.

Wearing Comfort and Tactile Sensitivity
The combination of breathable materials and soft leather on the inner side ensures high wearing comfort and good tactile sensitivity, which facilitates handling of fine components.

Certification and Safety
Certification under (EU) 2016/425 ensures compliance with European PPE requirements. Testing according to IEC 61482-1-2 and IEC 61482-1-1 confirms protective performance against arc faults. The glove is therefore suitable for industrial use.

Size and Fit
The glove is available in size 9, which corresponds to a standard size for work gloves. The fit is designed to conform well to the hand shape and enable secure handling.

Materials and Construction
The inner side is made of soft leather, and the outer layer is made of breathable materials.

Practical Use
The DEHNcare APG 9 is suitable for professionals in electrical engineering who perform maintenance and repair work on electrical installations. The protective performance against arc faults, combined with good tactile sensitivity and wearing comfort, makes it suitable equipment for industrial use.

Protection Type
The glove is designed for use in environments with arc fault risk. Testing according to IEC 61482-1-2 (Class 2) and IEC 61482-1-1 (ATPV 32.8 cal/cm²) confirms its protective effect. The materials used are selected to resist both mechanical and thermal stresses. The inner side made of soft leather supports tactile sensitivity, while the outer layer ensures protection against arc energy.

Size
The glove is available in size 9, which corresponds to a standard size for work gloves. The fit is designed to conform well to the hand shape and enable secure handling.

Certification
The glove is certified according to the PPE Regulation (EU) 2016/425, which governs the placing on the market of personal protective equipment. This certification ensures compliance with European PPE requirements and enables industrial use.

Materials
The inner side is made of soft leather, which enhances tactile sensitivity. The outer layer is made of breathable materials, which ensure wearing comfort.

Application
The glove is intended for maintenance and repair work on electrical installations, particularly where there is a risk of arc fault. It is suitable for professionals in electrical engineering who work near live electrical conductors or energized components.

Wearing Comfort
The use of breathable materials and the soft leather inner side ensures high wearing comfort. The gloves are designed to be comfortable even during prolonged use, without causing hand sweating or restricting movement.

Tactile Sensitivity
The soft leather inner side enables good tactile sensitivity, which facilitates handling of fine components and sensitive parts. This is particularly important for precise work in electrical engineering.

Arc Fault Protection
The glove was specifically developed for use in arc fault risk environments. Testing according to IEC 61482-1-2 (Class 2, 423 kJ/m²) and IEC 61482-1-1 (ATPV 32.8 cal/cm²) confirms its protective effect against thermal exposure during an arc. These values are critical for evaluating protective performance in electrical engineering.

Certification under PPE Regulation (EU) 2016/425
Certification under (EU) 2016/425 ensures that the glove meets European requirements for personal protective equipment. This is a prerequisite for industrial use and market placement within the EU.

Size 9
The glove is available in size 9, which corresponds to a standard size for work gloves. The fit is designed to conform well to the hand shape and enable secure handling.

Soft Leather Inner Side
The inner side is made of soft leather, which enhances tactile sensitivity and supports handling of fine components.

Breathable Materials
The use of breathable materials ensures high wearing comfort, as moisture is transported away and hands remain dry.

Box Test according to IEC 61482-1-2 (Class 2, 423 kJ/m²)
The Box Test evaluates the material’s ability to absorb and slow down thermal energy during an arc. A value of 423 kJ/m² in Class 2 indicates high protective performance.

ATPV Test according to IEC 61482-1-1 (32.8 cal/cm²)
The ATPV Test (Arc Thermal Performance Value) indicates the energy level at which the protective effect of the material begins to break through. A value of 32.8 cal/cm² confirms protective performance against thermal exposure during an arc fault.

Application in Electrical Engineering
The glove is specifically designed for maintenance and repair work on electrical installations, particularly where there is a risk of arc fault. It is suitable for professionals in electrical engineering who work near live electrical conductors or energized components.

Wearing Comfort and Tactile Sensitivity
The combination of breathable materials and soft leather on the inner side ensures high wearing comfort and good tactile sensitivity, which facilitates handling of fine components.

Certification and Safety
Certification under (EU) 2016/425 ensures compliance with European PPE requirements. Testing according to IEC 61482-1-2 and IEC 61482-1-1 confirms protective performance against arc faults. The glove is therefore suitable for industrial use.

Size and Fit
The glove is available in size 9, which corresponds to a standard size for work gloves. The fit is designed to conform well to the hand shape and enable secure handling.

Materials and Construction
The inner side is made of soft leather, and the outer layer is made of breathable materials.

Practical Use
The DEHNcare APG 9 is suitable for professionals in electrical engineering who perform maintenance and repair work on electrical installations. The protective performance against arc faults, combined with good tactile sensitivity and wearing comfort, makes it suitable equipment for industrial use.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/722794
qrcode für DEHN 785797 APG 9 Arc Flash Glove Size 9