| General |
| Manufacturer | DEHN |
| Test principle | Capacitive |
| Indication | Glow lamp |
| Norm | DIN VDE 0682-411 (EN/IEC 61243-1) |
| Application standard | DIN VDE 0105-100 (EN 50110-1) |
| Category | S |
| Application range | indoor switchgear |
| Operating frequency | 50 Hz |
| Nominal voltage (UN) | 20 kV |
| Total length (lG) | 1425 mm |
| Insertion depth (IO) | 720 mm |
The DEHN voltage tester type PHG2 20 is a capacitive testing device for verifying the absence of voltage at the work site in electrical installations, with all poles. It is designed as a compatible construction according to DIN VDE 0682-411 (EN/IEC 61243-1) and serves for the safe verification of conductors and installation components in accordance with DIN VDE 0105-100 (EN 50110-1). The device is intended for use in indoor switchgear and belongs to category ''S'', which defines its use in enclosed, not openly accessible switchgear. The test is performed by capacitive coupling, thereby avoiding direct electrical connection to the conductor under test.
Applications
The voltage tester PHG2 20 is used in electrical engineering to ensure, before starting work on electrical installations, that no voltage is present. It is particularly intended for work in indoor switchgear, where the risk of electric shock exists. The application is carried out in accordance with the regulations of DIN VDE 0105-100, which govern safety measures for work on electrical installations. The test is performed on all poles to ensure that all conductors, including neutral conductors, are de-energized.
Functions and equipment in detail
The device operates capacitively, meaning it detects electrical voltage via capacitive coupling without establishing direct electrical contact with the test object. This increases the safety of the operator, as no direct current path is required. The indication is provided by a neon lamp, which lights up in the presence of voltage. The neon lamp serves as a visual signal indicating voltage detection. The operating frequency of the device is designed for 50 Hz, which corresponds to the standard frequency in the German power grid.
Technology explained simply
Capacitive testing is based on the principle that an electric field is created between the test device and the conductor under test when voltage is present. This field induces a small electrical charge in the test device, sufficient to operate the neon lamp. The neon lamp lights up when voltage is present and remains off when the installation is de-energized. The test is performed without direct contact, increasing safety. The standard DIN VDE 0682-411 (EN/IEC 61243-1) sets the requirements for compatible constructions, ensuring that the device functions correctly in conjunction with other safety devices (such as earthing rails or test devices).
Compatibility and accessories
The voltage tester PHG2 20 is designed as a compatible construction, meaning it can be used within a system of safety devices all certified to the same standards. This ensures consistent and safe testing. The standard DIN VDE 0105-100 (EN 50110-1) defines the procedure for work on electrical installations, including the use of voltage testers. The device is intended for indoor switchgear, meaning it is not designed for open or freestanding installations outdoors.
Mounting and installation
The voltage tester is mounted by direct contact with the conductor under test. No additional mounting or installation is required. The device is simply placed against the conductor, where capacitive coupling enables voltage detection. The test is performed on all poles, meaning each individual conductor (phase, neutral conductor, protective conductor) must be tested separately to ensure no voltage is present.
Advantages in operation
The use of the DEHN PHG2 20 provides a safe and reliable method for voltage detection. Capacitive testing avoids direct electrical contacts, minimizing the risk of electric shock. The neon lamp provides a clear visual indication, which is also visible in poorly lit environments. Compliance with standards DIN VDE 0682-411 and DIN VDE 0105-100 ensures that the device can be safely used in a professional environment. Category ''S'' clearly defines the application area and prevents the device from being used in inappropriate applications.
Batteries are not included in the delivery scope.