DEHN 472415, EAN: 4013364470590

DEHN 472415 PAS EX 7AP SET PA-rail with Push-in

Installation > Grounding Systems > Grounding material

DEHN 472415 PAS EX 7AP SET PA-rail with Push-in

Lieske Part No. 1927363
Mfg Part No 472415
EAN-Code 4013364470590
Manufacturer DEHN
Here only 378,67 EUR
450,62 EUR incl. VAT

Further information for DEHN 472415 PAS EX 7AP SET PA-rail with Push-in

General
Connection cable lug1x flexible/rigid conductor 16–95 mm²
Material equipotential bonding barStSt
Material No.1.4301 / 1.4303
Fl adapter housing materialPolyamide / halogen-free, blue
Material of insulatorPolyamide / halogen-free, blue
Dimensions382 x 140 x 101 mm
Screwsd i M10 x 40 mm / d i M10 x 20 mm
Screw typewith spring washer
Lightning impulse current (10/350 µs) StSt (V4A) 30x3.5 mm / 40x5 mm2HExIIC 75 kA (non-sparking) T4, H 100 kA
Lightning impulse current (10/350 µs) St/tZn 30x3.5 mm/40x5 mm1HExIIC 100 kA (non-sparking) T4
Lightning impulse current (10/350 µs) Cu 16-95 mm21HExIIC 100 kA (non-sparking) T4
Max. short-circuit current (AC 50 Hz / DC / 5 s) StSt (V4A) 30x3.5 mm / 40x5 mm750 A / T4
Max. short-circuit current (AC 50 Hz / DC / 5 s) St/tZn 30x3.5 mm / 40x5 mm1500 A / T4
Max. short-circuit current (AC 50 Hz / DC / 5 s) Cu 16 mm²750 A / T4
Max. short-circuit current (AC 50 Hz / DC / 5 s) Cu 95 mm²3.1 kA / T4
Max. surface temperature T4135 °C
TypeUV-stabilised
StandardIEC 62561-1 / CLC 50703-2
Spark-free Ex equipotential bonding bar for integrating metallic conductors and cables into the lightning protection equipotential bonding in accordance with VDE 0185-305-3 (IEC 62305-3) and the protective and functional equipotential bonding in accordance with DIN VDE 0100 Part 410/540. For use in Ex zones 1 and 2 (gases, vapors, mists) and Ex zones 21 and 22 (dusts) explosion group IIC (safety factor 1) in accordance with CLC 50703-2. Corresponds to temperature class T4 and DIN EN 62561-1 (VDE 0185-561-1) lightning current carrying capacity class H (100kA). Screw locking against self-loosening in accordance with VDE 0185-305-3 Supplement 2. Can be used both indoors and outdoors. To avoid whisker formation in the Ex area, the use of tinned compression cable lugs with a nickel barrier layer is recommended. The product has the following connections: 1x flat (M10 x 40 mm with spring ring), 1x cable lug (M10 x 20 mm with spring ring) and 1x push-in adapter 4x 4-16mm².
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1927363
qrcode für DEHN 472415 PAS EX 7AP SET PA-rail with Push-in