| General |
| Connection cable lug | 7x flexible/rigid conductor 16–95 mm² |
| Material equipotential bonding bar | StSt |
| Screw material | StSt |
| Spring washer material | StSt |
| Material No. | 1.4301 / 1.4303 |
| Material of insulator | Polyamide / halogen-free, blue |
| Dimensions | 382 x 140 x 50 mm |
| Bar | 360 x 40 x 10 mm |
| Screws | d i M10 x 40 mm / d i M10 x 20 mm |
| Screw type | with spring washer |
| Lightning impulse current (10/350 µs) Cu 16-95 mm2 | 1HExIIC 100 kA (non-sparking) T4 |
| Max. short-circuit current (AC 50 Hz / DC / 5 s) Cu 16 mm² | 750 A / T4 |
| Max. short-circuit current (AC 50 Hz / DC / 5 s) Cu 95 mm² | 3.1 kA / T4 |
| Max. surface temperature T4 | 135 °C |
| Type | UV-stabilised |
| Standard | IEC 62561-1 / CLC 50703-2 |
Spark-free Ex equipotential bonding bar for integrating metallic conductors and cables into the lightning protection equipotential bonding in accordance with VDE 0185-305-3 (IEC 62305-3) and the protective and functional equipotential bonding in accordance with DIN VDE 0100 Part 410/540. For use in Ex zones 1 and 2 (gases, vapors, mists) and Ex zones 21 and 22 (dusts) explosion group IIC (safety factor 1) in accordance with CLC 50703-2. Corresponds to temperature class T4 and DIN EN 62561-1 (VDE 0185-561-1) lightning current carrying capacity class H (100kA). Screw locking against self-loosening in accordance with VDE 0185-305-3 Supplement 2. Can be used both indoors and outdoors. To avoid whisker formation in the Ex area, the use of tinned compression cable lugs with a nickel barrier layer is recommended. The product has the following connections: 7x cable lug (M10 x 20 mm with spring ring).