DEHN 459010, EAN: 4013364099838

DEHN 459010 UTK 8.10 16 STTZN UNI disconnect clamp St/tZn

Installation > Grounding Systems > Lightning protection material

DEHN 459010 UTK 8.10 16 STTZN UNI disconnect clamp St/tZn

Lieske Part No. 170307
Mfg Part No 459010
EAN-Code 4013364099838
Manufacturer DEHN
Here only 7,03 EUR
8,37 EUR incl. VAT

Further information for DEHN 459010 UTK 8.10 16 STTZN UNI disconnect clamp St/tZn

General
NormDIN EN 62561-1
ModelWithout intermediate plate
Suitable for earth rod connectors16 mm mm
Suitable for conductor cross-section8-10 mm²
MaterialSt/tZn
Clamping range Rd / Rd8-10 / 16 mm
Screwd i M8 x 20 mm
Screw materialStSt
Distance of screws40 mm
Material thickness (t1)3 mm
StandardEN 62561-1
The DEHN UTK 8.10 16 STTZN is a UNI-disconnect clamp developed in accordance with the standard DIN EN 62561-1 and specifically designed for use in lightning protection systems. It is intended for the secure connection of the down conductor with the earth entry, particularly for earth entry rods with a diameter of 16 mm. The clamp is designed without an intermediate plate, enabling a direct and stable connection between the conductors. The designation STTZN indicates the material combination of steel (St) and galvanized steel (TZN), which ensures high corrosion resistance and mechanical strength.

Lightning protection systems require reliable and durable connections to ensure the safe dissipation of lightning currents. The UTK 8.10 16 STTZN serves as a disconnect clamp, allowing the down conductor to be disconnected from the earth entry without damaging the entire installation. This is particularly advantageous during maintenance work or when inspecting the earth connection. The clamp is designed for cross-sections of 8 to 10 mm², making it suitable for typical down conductors in building earthing applications.

Functions and equipment in detail
This clamp is designed as a UNI-disconnect clamp, meaning it is universally applicable and adaptable to various installation scenarios. The design without an intermediate plate ensures a direct metallic connection between the down conductor and the earth entry, minimizing transition resistance. The material combination of steel and galvanized steel provides high mechanical strength and sufficient corrosion protection, especially in outdoor or humid environments. The clamp is designed for secure mounting on earth entry rods with a diameter of 16 mm.

Technology explained clearly
The disconnect clamp operates on the principle of mechanical connection, where the down conductor is fastened to the earth entry via a screw connection. The use of galvanized steel (TZN) ensures that the clamp maintains its function over a long period even under exposure to moisture or atmospheric corrosion. The standard DIN EN 62561-1 defines the requirements for construction, electrical properties, and testing procedures for such disconnect clamps. Therefore, the clamp is suitable for use in professional lightning protection systems that must comply with applicable safety standards.

Compatibility and accessories
The UTK 8.10 16 STTZN is specifically designed for earth entry rods with a diameter of 16 mm. It is intended for down conductors with a cross-section of 8 to 10 mm², making it suitable for most standard applications in building earthing. The clamp is part of DEHN’s comprehensive product range, which includes various disconnect clamps for different diameters and cross-sections. Combination with other components of the lightning protection system, such as earth spikes or down conductors, is achieved through mechanical connection of the conductors.

Installation and mounting
The mounting of the disconnect clamp is done by direct fastening to the earth entry rod with a diameter of 16 mm. The down conductor is attached to the clamp via a screw connection. The connection must be tight and secure to ensure low transition resistance. Installation typically takes place during the setup of a lightning protection system, with the clamp positioned at an appropriate location between the down conductor and the earth entry. The use of suitable tools, such as a screwdriver or wrench, is required to properly tighten the screws.

The clamp is designed for use in lightning protection systems, where the connection between the down conductor and the earth entry must be secure and durable. The material combination of steel and galvanized steel ensures high mechanical strength and corrosion resistance. The clamp is manufactured in accordance with DIN EN 62561-1, ensuring compliance with required safety and performance standards. Its use in combination with other components of the lightning protection system, such as earth spikes or down conductors, is achieved through mechanical connection of the conductors. Mounting is done by fastening to the earth entry rod with a 16 mm diameter, followed by connecting the down conductor via a screw connection. The connection must be tight and secure to ensure low transition resistance. Installation typically takes place during the setup of a lightning protection system, with the clamp positioned at an appropriate location between the down conductor and the earth entry. The use of suitable tools, such as a screwdriver or wrench, is required to properly tighten the screws.

Advantages in operation
The UTK 8.10 16 STTZN provides a reliable and durable connection between the down conductor and the earth entry, which is essential for the functionality of a lightning protection system. The design without an intermediate plate ensures direct metallic contact, minimizing transition resistance. The material combination of steel and galvanized steel ensures high mechanical strength and corrosion resistance, extending the service life of the clamp. Compliance with the standard DIN EN 62561-1 ensures that the clamp meets the required safety and performance specifications. Thus, the clamp is suitable for use in professional lightning protection systems that must comply with applicable standards.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/170307
qrcode für DEHN 459010 UTK 8.10 16 STTZN UNI disconnect clamp St/tZn