DEHN 308035, EAN: 4013364123472

DEHN 308035 connection terminal Rd 6–22/Fl 40 mm

Installation > Grounding Systems > Lightning protection material

DEHN 308035 connection terminal Rd 6–22/Fl 40 mm

Lieske Part No. 837916
Mfg Part No 308035
EAN-Code 4013364123472
Manufacturer DEHN
Here only 7,69 EUR
9,15 EUR incl. VAT

Further information for DEHN 308035 connection terminal Rd 6–22/Fl 40 mm

General
NormDIN EN 62561-1
Connection diameter round conductor6-22 mm
Flexible connection cross-section40 mm²
MaterialSt/bare
FunctionConnection terminal for reinforcement and grounding anchor points
Mountingin formwork
Clamping range Rd / Rd(+/II) 6-22 / 6-10 mm
Clamping range Rd / Fl(+) 6-22 / 40 mm
Screwd i M10 x 60 mm
Lightning current carrying capability (10/350 µs)& *)
StandardEN 62561-1
Short-circuit current (AC 50 Hz / DC) (1 s; ≤ 300 °C)1.0 kA
Terminal blockYes
The connection clamp VK 6.22 FL40 KB6.10 BSB STBL from DEHN is a component for grounding systems in lightning protection, specifically designed for use in concrete construction. It is used for the secure connection of reinforcement steel in the area of electrical grounding, particularly in structural elements such as foundations, walls, or ceilings. The clamp enables the connection of round conductors with a diameter of 6 to 22 mm, as well as flexible conductors with a cross-section of 40 mm². It is equipped with a clamp block that simultaneously allows fixation in the formwork, simplifying installation during the construction process.

Connection clamp according to DIN EN 62561-1
The clamp complies with the standard DIN EN 62561-1, which specifies requirements for connection elements in lightning protection systems. This standard ensures a reliable electrical connection and durable contact, even under mechanical stress and in damp environments. The connection clamp is therefore suitable for use in grounding systems requiring high electrical conductivity and mechanical stability.

Applications
The clamp is used in construction where a secure connection between reinforcement steel and grounding conductors is required. It is particularly suitable for smaller diameters in the range of 6 to 22 mm, making it appropriate for many standard applications in building and civil engineering. The simultaneous fixation in the formwork enables integrated installation during concreting, allowing the grounding loop to be incorporated during the construction process.

Functions and equipment in detail
The clamp features a clamp block that allows secure connection of round conductors or grounding anchor points. The clamp block ensures a mechanically stable and electrically conductive contact. The design for small diameters makes it especially suitable for applications where space is limited or only smaller cross-sections are installed. The clamp is made of bare steel, providing high mechanical strength and corrosion resistance under the given conditions.

Technology explained simply
The connection clamp operates on the principle of mechanical clamping. The round conductor is inserted into the clamp block and secured by a screw connection or pressure mechanism. This creates a direct metallic contact between the conductor and the reinforcement steel. The clamp is designed to maintain contact even during movements in the concrete or thermal expansions. Fixation in the formwork is achieved via integrated holding elements that secure the clamp at the designated position during concreting.

Compatibility and accessories
The clamp is compatible with round conductors in the diameter range of 6 to 22 mm and flexible conductors with a cross-section of 40 mm². It can be used in conjunction with grounding anchor points to ensure a continuous grounding loop. Use in formwork systems is intended, with fixation directly in the formwork, without requiring additional holders or mounting elements.

Installation and mounting
Installation takes place during the formwork process. The clamp is placed at the designated position in the formwork and connected to the reinforcement steel. The round conductor or grounding anchor point is inserted into the clamp block and securely clamped. Fixation in the formwork is achieved via integrated holding elements that stabilize the clamp during concreting. After the concrete has hardened, the connection is permanent and electrically conductive.

Advantages in operation
The clamp provides a reliable and durable connection in the grounding system, remaining stable even under the stresses of concreting and subsequent use. The integrated fixation in the formwork reduces installation effort and enables precise positioning. The use of bare steel ensures high mechanical strength and good corrosion resistance under the given conditions. Conformity with DIN EN 62561-1 guarantees compliance with required safety standards in lightning protection.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/837916
qrcode für DEHN 308035 connection terminal Rd 6–22/Fl 40 mm