DEHN 306101, EAN: 4013364024120

DEHN 306101 PV 5.16 SKM10X50 CU parallel connector Cu

Installation > Grounding Systems > Lightning protection material

DEHN 306101 PV 5.16 SKM10X50 CU parallel connector Cu

Lieske Part No. 963666
Mfg Part No 306101
EAN-Code 4013364024120
Manufacturer DEHN
Here only 76,66 EUR
91,23 EUR incl. VAT

Further information for DEHN 306101 PV 5.16 SKM10X50 CU parallel connector Cu

General
ManufacturerDEHN
NormDIN EN 62561-1
Connection technologyScrews
Rope diameter5-16 mm
Cross-sectional area16-150 mm²
Material of clampCu
Clamping range Rd / Rd5-16 mm
Clamping range (stranded / cable)16-150 mm²
StandardEN 62561-1
Short-circuit current (AC 50 Hz / DC) (1 s; ≤ 300 °C)18.5 kA
The DEHN parallel connector type PV 5.16 SKM10X50 CU is a connection element specifically developed for use in earthing systems and lightning protection installations. It is designed for the secure and durable connection of two conductor cables in parallel arrangement, where the cables may have different diameters. The product is made of copper and complies with the standard DIN EN 62561-1, which defines requirements for lightning protection materials. The design is generously dimensioned to ensure a stable connection even under higher mechanical loads.

Applications

The parallel connector is used in the field of lightning protection and earthing technology, particularly where multiple conductor cables need to be run in parallel and connected together. This is common, for example, when expanding existing earthing systems or connecting differently dimensioned cables within lightning protection installations. The connection is made using two screws, which ensure a mechanically secure and electrically conductive bond. The construction allows for the connection of cables with a diameter range of 5 to 16 mm, where the cross-sectional area of the cables can range between 16 and 150 mm².

Functions and Features in Detail

The connector is designed to provide a secure connection even with cables of different diameters. The two screws enable precise clamping of the cables, achieving optimal electrical conductivity and mechanical stability. The use of copper as the material ensures high electrical conductivity and good corrosion resistance, which is crucial for the long-term stability of the connection. The design as a parallel connector allows for parallel cable routing, thereby increasing the overall conductivity.

Technology Explained Simply

The standard DIN EN 62561-1 specifies requirements for lightning protection materials, particularly regarding electrical conductivity, mechanical strength, and corrosion resistance. The parallel connector meets these requirements and is therefore suitable for use in professional lightning protection and earthing systems. The connection is achieved through mechanical clamping using screws, creating a durable and reliable electrical connection. The use of copper ensures that the resistance of the connection remains low, which is important for the efficiency of the entire earthing system.

Compatibility and Accessories

The parallel connector is designed for cables with a diameter of 5 to 16 mm and a cross-sectional area of 16 to 150 mm². It is therefore compatible with a wide range of earthing and lightning protection cables commonly used in electrical and safety technology. The connection is made using two screws, which are included in the delivery scope. No additional accessories are required for installation.

Installation and Mounting

Installation is carried out by tightening the two screws, which clamp the cables securely into the connector. The screws must be tightened according to the mounting instructions to ensure a secure connection. Installation typically takes place during the construction or expansion of earthing systems and lightning protection installations. The connection is visually inspectable after mounting and can be checked, if necessary, for mechanical strength and electrical conductivity.

Operational Advantages

The parallel connector provides a reliable and durable connection between two conductor cables, thereby increasing the electrical conductivity of the system. The use of copper ensures high corrosion resistance and low electrical resistance. The design as a large connection element allows for the connection of cables with different dimensions, increasing flexibility in planning and installing earthing systems. The simple screw-based installation reduces installation effort and enables quick and secure connections.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/963666
qrcode für DEHN 306101 PV 5.16 SKM10X50 CU parallel connector Cu