| General |
| Material of roof conductor holder | StSt |
| Material thickness (t1) | 2.5 mm |
| Clamping range | Ø20-25 mm |
| Type of conductor holder | clamping piece |
| Material of conductor holder | StSt |
| Conductor support Rd | 6-10 mm |
| Conductor routing | fixed |
| Screw | e M8 x 25 mm |
| Material of screw / nut | StSt |
| Standard | EN 62561-1 |
The DLH KB 6.10 RSF20.25 V2A roof conductor holder from DEHN is a special mounting component designed for metal roofs, used to install additional collection devices such as collection conductors or collection rods. It is designed for round standing seam roofs and features a clamp block that enables a secure and durable connection to the roof profile. The construction ensures reliable lightning current dissipation, achieving a lightning current carrying capacity of 100 kA (10/350 µs) when two tested roof conductor holders are used for the respective roof profile. This meets the requirements of standard DIN EN 62561-1, which applies to lightning protection systems in the construction industry.
Applications
The roof conductor holder is used in lightning protection, particularly for installing collection devices on metallic roof structures. It is suitable for round standing seam roofs where a mechanically stable and electrically conductive mounting is required. The application typically occurs as part of lightning protection systems that are planned and executed according to applicable standards. The product is used in conjunction with other lightning protection components to ensure a complete and effective dissipation path.
Functions and Equipment in Detail
The conductor holder consists of a clamp block designed for a clamping range of Ø20–25 mm to secure it to round standing seam profiles. The conductor guidance is fixed, and the holder provides a receptacle for round conductors with a diameter of 6–10 mm. The entire construction is made of NIRO (V2A), ensuring high corrosion resistance and long-term stability in outdoor environments. The screw (e M8 x 25 mm) and nut are also made of NIRO to ensure uniform material quality and prevent galvanic contact corrosion.
Technology Explained Simply
The material thickness of the roof conductor holder is 2.5 mm, providing sufficient mechanical strength for mounting on roof profiles. The use of NIRO (V2A) as the material ensures high resistance to weather influences, particularly moisture and salt exposure, which is critical for roof installations in outdoor environments. The clamp block technology allows for easy and secure installation without additional tools, while the screw connection ensures a permanent anchoring. The fixed conductor guidance ensures that the collection conductor cannot shift or loosen, preserving electrical conductivity and mechanical stability.
Compatibility and Accessories
The roof conductor holder is specifically designed for round standing seam roofs and can be combined with other DEHN lightning protection components to create a complete lightning protection system. Compatibility with conductors in the diameter range of 6–10 mm allows use with standard collection conductors. Installation requires two tested roof conductor holders per roof profile to achieve the required lightning current carrying capacity of 100 kA (10/350 µs). The standard DIN EN 62561-1 forms the basis for testing and approval of the product.
Mounting and Installation
Installation is performed by securing the clamp block to the round standing seam profile using the supplied screw (e M8 x 25 mm). The screw is screwed into the roof profile, with the clamp jaws enclosing the profile cross-section. The collection conductor is inserted into the holder and secured. Installation requires no additional tools other than a screwdriver or suitable wrench. The installation must be carried out as part of the lightning protection planning and in accordance with applicable standards.
Operational Advantages
The roof conductor holder provides a mechanically stable and electrically conductive mounting that meets the requirements of lightning protection systems. The use of NIRO (V2A) ensures long service life and low maintenance. The clamp block technology enables quick and secure installation, reducing installation time. The fixed conductor guidance prevents displacement of the collection conductor, increasing system reliability. The tested lightning current carrying capacity of 100 kA (10/350 µs) when using two holder sets ensures safe dissipation of lightning currents, which is crucial for the protective function.