DEHN 106331, EAN: 4013364100367

DEHN 106331 DIDH 7.10 1030 D50 V2A spacing holder round wire 7–10 mm

Installation > Grounding Systems > Lightning protection material

DEHN 106331 DIDH 7.10 1030 D50 V2A spacing holder round wire 7–10 mm

Lieske Part No. 449386
Mfg Part No 106331
EAN-Code 4013364100367
Manufacturer DEHN
Here only 115,99 EUR
138,03 EUR incl. VAT

Further information for DEHN 106331 DIDH 7.10 1030 D50 V2A spacing holder round wire 7–10 mm

General
ManufacturerDEHN
Applicationspacers for support pipes
Support tube diameter7-10 mm
MaterialV2A
NormDIN EN 62305
Clearance distance50 mm
Material of spacerGRP
Material of fixing elementStSt
Total length (l1)1030 mm
Insulating clearance (l2)945 mm
StandardDIN EN IEC 62561-8 (VDE 0185-561-8)
The DIDH 7.10 1030 D50 V2A distance holder from DEHN is a mounting element specifically developed for use in lightning protection systems. It is designed for the secure mounting of conductors on support pipes and ensures compliance with the required separation distance according to DIN EN 62305 (VDE 0185-305-3). This standard specifies the technical requirements for lightning protection systems in buildings and outdoor installations, where the separation distance is crucial to avoid unwanted electrical coupling between different conductors or systems. The distance holder is particularly used in installations where multiple conductors are laid in parallel and a secure electrical separation is required, for example in building electrotechnics or industrial plants.

Applications

The distance holder is intended for use in installations where conductors must be attached to round support pipes with a diameter of 7 to 10 mm. It is frequently used in lightning protection systems to ensure electrical separation between lightning protection conductors and other electrical conductors (e.g. power or data lines). Compliance with the separation distance according to DIN EN 62305 is a central aspect of installation safety, to prevent spark overvoltage or inductive interference. The application is particularly common in buildings where the lightning protection system is laid in close proximity to other electrical systems.

Functions and Features in Detail

The distance holder enables a firm and permanent fixation of the conductors to the support pipe. It ensures that the conductors are held at a defined distance from the support pipe, thus guaranteeing compliance with the prescribed separation distances. The design is engineered to withstand mechanical loads caused by wind, vibrations, or thermal expansion. The use of V2A (stainless steel 1.4301) as the material ensures high corrosion resistance and long service life, especially in damp or aggressive environments. This makes the distance holder suitable for outdoor applications where high resistance to weather influences is required.

Technology Explained Simply

The distance holder functions as a mechanical holding element that lifts the conductor away from the surface of the support pipe. This creates a defined air gap between the conductor and the pipe, ensuring electrical insulation. The standard DIN EN 62305 (VDE 0185-305-3) specifies that this distance must be at least 50 mm, depending on the system and environment, to ensure safe separation. The distance holder is designed specifically to guarantee this distance. The use of V2A ensures that the component does not corrode or lose its strength even under long-term exposure to moisture, salt spray, or other environmental influences.

Compatibility and Accessories

The distance holder is specifically designed for round support pipes with a diameter of 7 to 10 mm. It is therefore compatible with standard support pipes of these dimensions, commonly used in electrical installations and lightning protection. Its use in combination with other DEHN products, such as lightning protection conductors or grounding elements, is possible, provided the mechanical and electrical requirements of the respective installation are met.

Installation and Mounting

Mounting is done by attaching the distance holder to the support pipe, with the conductor placed into the designated holding area. The installation does not require special tools, but correct positioning and secure fastening must ensure that the separation distance according to DIN EN 62305 is maintained. Installation should be carried out by qualified professionals to meet safety requirements.

Operational Advantages

The distance holder provides a reliable and durable solution for securing conductors to support pipes. The use of V2A ensures a long service life and high resistance to corrosion, which is particularly beneficial in damp or industrial environments. Compliance with the separation distance according to DIN EN 62305 reduces the risk of electrical interference and increases the overall safety of the installation. The simple mounting and mechanical stability make the distance holder a practical component in professional electrical and lightning protection installations.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/449386
qrcode für DEHN 106331 DIDH 7.10 1030 D50 V2A spacing holder round wire 7–10 mm