Further information for DEHN 105332 support tube D50 L 4700 mm
General
Pipe diameter
50 mm
Tube length
4700 mm
Material
GFRP/Al
Catch tip diameter
10 mm
Catch tip length
1000 mm
Catch tip material
NIRO
Material factor
0,7
Colour
Light grey
Model
monoblock
End cap
Inner lying
Spring element
PA
Compatibility
HVI long cable
Norm
DIN EN 62305-3 (VDE 0185-305-3)
Material of air-termination tip
StSt
Length of air-termination rod
1000 mm
Material of supporting tube
GRP / Al
Length of supporting tube
4700 mm
Transport length
4700 mm
Diameter Ø outside
50 mm
Length of insulating clearance
1535 mm
Wall thickness
4 mm
Material factor km
0.7
Permanent temperature range
-50 °C ... +100 °C
Type
UV-stabilised
Sleeve
60 x 5 mm
Max. free length with air-termination tip (wall mounting)
4000 mm
Max. gust wind speed
(Max. free length 4,000 mm, 1x HVI inside) 237, (Max. free length 4,000 mm, 1x HVI outside) 184, (Max. free length 4,000 mm, 4x HVI outside) 149 km/h
Pull-out force with a length of 500 mm
200 N (supporting tube insulator as per 62561-8)
Bending force with a length of 500 mm
200 N (supporting tube insulator as per 62561-8)
Standard
DIN EN IEC 62561-8 (VDE 0185-561-8)
UV stabilisation
The DEHN support tube SR D50 4700 FSP1000 IP HVI GFK AL is a single-piece component designed for use in lightning protection systems. It serves as a carrier for collection devices with integrated collection tip and enables a separate, insulated construction of the lightning protection conductor. The tube is specifically designed for use with the HVI long conductor and ensures the required separation distance from electrically conductive parts in accordance with DIN EN 62305-3 (VDE 0185-305-3). The construction made of glass-fibre-reinforced plastic (GFK) offers high mechanical strength and chemical resistance, while UV stabilisation enables durable use in outdoor environments. The colour of the tube is light grey, ensuring good visibility while allowing optical integration into technical installations.
Applications
The support tube is used in lightning protection systems, particularly in installations where electrical separation between the lightning protection conductor and other conductive components is required. It is suitable for use in buildings, industrial facilities or open-area installations where safe dissipation of lightning currents in compliance with standards is necessary. Use in combination with the HVI long conductor enables flexible and secure mounting of collection tips, which are directly attached to the tube.
Functions and Equipment in Detail
The tube features an internal end cap, ensuring a closed and weather-resistant end finish. Additionally, a PA spring element is integrated, enabling elastic compensation for thermal or mechanical stresses. The integrated collection tip has a diameter of 10 mm and a length of 1000 mm and is made of NIRO (stainless steel), providing high corrosion resistance and mechanical strength. The combination of support tube and collection tip in a single unit reduces installation time and increases installation reliability.
Technology Explained Simply
The material GFK (glass-fibre-reinforced plastic) is characterised by high strength at low weight and is resistant to environmental influences such as UV radiation or moisture. The material factor km = 0.7 describes the electrical conductivity property of the material and is crucial for assessing insulation capability in lightning protection systems. UV stabilisation prevents discolouration or material degradation due to sunlight exposure. The integrated collection tip made of NIRO ensures reliable lightning dissipation, as it exhibits high electrical conductivity and mechanical stability.
Compatibility and Accessories
The support tube is specifically developed for use with the HVI long conductor. It is designed for use in systems requiring a separate collection device to maintain the separation distance from other electrical conductors. Compatibility with the HVI long conductor allows direct connection without additional adapters or intermediate pieces. The integrated collection tip is already mounted on the tube, so no additional mounting components are required.
Mounting and Installation
Installation is carried out by securing the support tube to suitable support structures, positioning it so that the required separation distance from electrically conductive parts is maintained. The HVI long conductor is connected directly to the integrated collection tip. The elastic PA spring elements allow compensation for movements caused by temperature fluctuations or mechanical loads. The single-piece design reduces the number of mounting points and increases installation speed.
Operational Advantages
Using the DEHN support tube SR D50 4700 FSP1000 IP HVI GFK AL ensures reliable and durable lightning protection functionality. The integrated collection tip and PA spring element reduce the number of required components and increase installation safety. UV stabilisation and the material strength of the GFK tube ensure long service life even under harsh environmental conditions. Compliance with the standard DIN EN 62305-3 (VDE 0185-305-3) ensures that the installation meets legal and technical requirements.