| General |
| Material of roof tile | aluminium, with UV-stabilised plastic coating |
| Dimensions of roof tile | 450 x 500 mm |
| Diameter Ø of mast hole | 10 / 16 / 48 mm |
| Roof inclination | 24-53° |
| Material of rubber grommet | UV-stabilised rubber mixture |
| Material of sealing tape | rubber-based plastic sealant |
| Type of sealing tape | strongly adhesive, self-welding |
| Dimensions of sealing tape | 600 x 80 mm |
| Processing temperature | +5 °C ... +40 °C |
| Permanent temperature range of sealing tape | -40 °C ... +80 °C |
| Colour | red ● |
The DADS D10 16 48 AL ROT roof penetration kit from DEHN is a product specifically developed for steep roofs, designed for the safe penetration and sealing of masts and pipes, for example roof truss holders, through roof tiles. It consists of a deformable aluminium roof tile, a rubber sleeve, and a sealing tape, enabling universal application on various roof tile types and stones. The construction is designed for roof inclinations between 24 and 53 degrees, ensuring broad applicability on different roof structures.
Applications
This product is primarily used in the field of lightning protection and earthing technology, where it is necessary to safely route electrical or metallic conductors through the roof without compromising the roof waterproofing. It is suitable for installing antenna masts, lightning protection conductors, cable shafts, or other pipe lines that must pass through the roof. Its use on steep roofs with tile or stone cladding is specifically intended, with the deformable aluminium construction allowing adaptation to different roof tile profiles.
Functions and Equipment in Detail
The aluminium roof tile has dimensions of 450 x 500 mm and is coated with UV-stabilised plastic, ensuring high resistance to weather influences and UV radiation. The colour of the roof tile is red, enabling visual coordination with certain roof tile types. The rubber sleeve is made of a UV-stabilised rubber compound and serves as an elastic sealing element that adapts to the shape of the penetration pipe. The sealing tape is a plastic sealing compound based on rubber, designed as strongly adhesive and self-welding, with dimensions of 600 x 80 mm. It ensures a durable, watertight seal between the roof tile and the roof surface.
Technology Explained Simply
The deformable structure of the aluminium roof tile allows adaptation to different roof tile profiles, making the kit universally applicable. The rubber sleeve elastically adapts to the penetration pipe, preventing cracks or leaks. The sealing tape is applied to the roof surface and forms a durable, self-welding seal that maintains its function even under temperature fluctuations. Processing is carried out at temperatures between +5 °C and +40 °C, while the sealing tape withstands temperatures permanently from -40 °C to +80 °C. These properties make the kit suitable for outdoor use, even under extreme climatic conditions.
Compatibility and Accessories
The roof penetration kit is designed for penetrations with mast holes in diameters of 10 mm, 16 mm, and 48 mm. It is therefore compatible with a wide range of pipe and mast diameters ranging from 38 mm to 60 mm. It is used in conjunction with lightning protection systems, particularly in combination with products from the DEHNcon-H family, as specified in the manufacturer’s catalogue. No special accessories are required, as the kit contains all necessary components for sealing.
Installation and Mounting
Installation is carried out by adapting the deformable aluminium roof tile to the respective roof tile profile, inserting the rubber sleeve over the penetration pipe and placing it into the hole in the roof tile. The sealing tape is then applied to the roof surface and laid around the roof tile and pipe hole, with its self-welding property ensuring a tight connection. Processing is carried out at temperatures between +5 °C and +40 °C, and the seal forms a durable waterproof barrier after curing.
Operational Advantages
The roof penetration kit provides a reliable, watertight seal that remains stable even under long-term exposure to weather influences. The use of UV-stabilised materials ensures high durability and weather resistance. The universal adaptability to various roof tile profiles reduces the need for special modifications and enables quick, workshop-independent installation. The combination of aluminium roof tile, rubber sleeve, and sealing tape represents a complete, integrated solution suitable for use in lightning protection and earthing applications.