DEHN 105201, EAN: 4013364095915

DEHN 105201 DBS KB D40.50 RA1435 STTZN three-legged stand 6-8.5 m

Installation > Grounding Systems > Lightning protection material

DEHN 105201 DBS KB D40.50 RA1435 STTZN three-legged stand 6-8.5 m

Lieske Part No. 637962
Mfg Part No 105201
EAN-Code 4013364095915
Manufacturer DEHN
Here only 774,15 EUR
921,24 EUR incl. VAT

Further information for DEHN 105201 DBS KB D40.50 RA1435 STTZN three-legged stand 6-8.5 m

General
Compatibilitysupport tube DEHNiso-Combi D50 length 3200 mm
Roof slope adjustmentup to max. 10°
Modelfoldable
Mounting methodwith concrete bases and wedge technology
Concrete base positioningtwo below, one above the leg
Applicationfor indoor-installed HVI cables in support conduit
Material of tripodSt/tZn
Support40 / 50 mm
Radius1435 mm
Number of concrete bases3-12 blocks 17 kg each
Space required for tripod2520 x 2860 mm
The DEHN three-legged stand type DBS KB D40.50 RA1435 STTZN is a specially designed support system for freestanding mounting of support pipes of type DEHNiso-Combi with a diameter of 50 mm and a length of 3200 mm. It serves as a stable base for lightning protection systems, particularly in combination with internally installed HVI conductors, which are routed within the support pipe. The construction allows for secure and weather-resistant installation without additional fastening to existing structural elements, enabling flexible placement on roofs or open areas.

Applications

The three-legged stand is designed for use in lightning protection systems, particularly in buildings with flat or slightly sloped roofs. It is suitable for erecting support pipes that serve as guide elements for HVI conductors routed inside the pipe. The maximum roof slope that the system can compensate for is 10°, allowing adaptation to slightly inclined roof surfaces. The foldable design facilitates transportation and installation, especially in limited space or hard-to-reach areas.

Functions and Equipment in Detail

The stand is erected using concrete plinths and wedge technology, ensuring stable and durable anchoring in the ground. The positioning of the concrete plinths is such that two plinths are placed below the leg and one plinth above. This arrangement ensures compliance with the required bending radius of the HVI conductor at the lower end of the stand, preventing mechanical damage to the conductor. The foldable design enables compact storage and easy installation.

Technology Explained Simply

The construction of the three-legged stand takes into account the specific requirements of lightning protection systems, particularly mechanical stability and compliance with bending radii for internally installed HVI conductors. The use of concrete plinths with wedge technology ensures firm anchoring, which remains intact even under wind loads or external forces. The foldable design reduces space requirements during storage and transport and simplifies installation by reducing handling complexity.

Compatibility and Accessories

The three-legged stand is specifically designed for use with support pipes of type DEHNiso-Combi (diameter 50 mm, length 3200 mm). It is designed for mounting HVI conductors inside the pipe, with the bending radius requirements at the lower end of the stand being met by the positioning of the concrete plinths. Compatibility with the specified support pipes and wedge technology is an integral part of the construction.

Installation and Mounting

Installation is carried out by positioning the three concrete plinths at the specified distance, with two plinths placed below and one above the leg. The stand is then placed onto the plinths and secured using wedge technology. The foldable design enables easy installation, with stability ensured by anchoring in the ground. No additional fastening to existing structural elements is required.

Operational Advantages

The three-legged stand provides a stable and durable base for lightning protection systems, particularly in combination with internally installed HVI conductors. The foldable design reduces transportation effort and simplifies installation. Adaptation to roof slopes up to 10° expands the range of applications to slightly inclined roofs. The use of concrete plinths with wedge technology ensures secure anchoring, which remains intact even under external loads.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/637962
qrcode für DEHN 105201 DBS KB D40.50 RA1435 STTZN three-legged stand 6-8.5 m