| General |
| Diameter | 10 mm |
| Mounting | Ambidextrous |
| Application range | Roof structures, chimneys, elevated structures |
| Mounting options | concrete base with wedge technology, rod holder, spacing holder |
| Total length (l1) | 1000 mm |
| Material | Cu |
| Diameter Ø | 10 mm |
| Standard | EN 62561-2 |
The DEHN lightning rod type FS 10 1000 CU is a lightning protection component made of copper, specifically designed for the protection of roof structures, chimneys, and similar structures. The rod has a diameter of 10 mm and a length of 1000 mm and is tapered on both ends, enabling a secure and stable connection to other lightning protection components. It serves as a down conductor in the lightning protection system and is typically used in combination with other elements such as down conductors, grounding elements, and brackets to ensure effective dissipation of lightning currents.
Lightning protection component
The lightning rod is an integral part of an external lightning protection system. It is installed at elevated points on buildings or roof structures to capture lightning discharges and safely conduct them into the grounding system. The use of copper as the material ensures high electrical conductivity and corrosion resistance, which is crucial for the long-term stability of the system.
Applications
The rod is particularly suitable for use on roof structures, chimneys, flues, antenna masts, or other elevated structures exposed to an increased risk of lightning strikes. It can also be installed in combination with a concrete plinth (weight 8.5 kg) using wedge technology, enabling stable fixation on load-bearing substrates. Alternatively, it can be mounted using rod holders or spacing brackets to ensure flexible adaptation to different roof constructions.
Functions and equipment in detail
The double-sided tapering of the rod enables a secure connection to other lightning protection conductors or down conductors. This design ensures that the electrical connection remains stable and prevents mechanical or electrical weak points. The rod is made of solid copper, providing high strength and resistance to external influences such as weather or mechanical stress.
Technology explained simply
The function of the lightning rod is based on the principle of lightning diversion: during a nearby lightning strike, the rod acts as a preferred path for the high current to flow, thereby preventing damage to the structure. The use of copper ensures low electrical resistance and thus efficient current dissipation. The double-sided tapering allows for easy and secure connection to additional conductors, enhancing the overall safety of the lightning protection system.
Compatibility and accessories
The lightning rod is compatible with various mounting and fastening systems, particularly with concrete plinths (8.5 kg) and wedge technology, as well as with rod holders or spacing brackets. These accessories enable adaptable installation on different roof constructions and materials.
Installation and mounting
Installation is carried out depending on requirements either with a concrete plinth using wedge technology or via rod holders/spacing brackets. The double-sided tapering facilitates connection to other lightning protection components. Installation requires professional fixation to ensure a stable and electrically conductive connection. The exact installation must comply with applicable standards and regulations for lightning protection systems.
The lightning rod is delivered as a single component without additional mounting accessories.
Operational advantages
The use of the DEHN FS 10 1000 CU provides a reliable and durable solution for lightning protection of elevated structures. The combination of copper material and double-sided tapering ensures high mechanical and electrical stability. The flexibility in mounting through various fastening options allows adaptation to different site conditions without impairing the system's functionality. The rod is designed for outdoor use and withstands long-term weather influences.