Certificates
Compliance certificates	RoHS
Safety	UL, TUV, CDRH
Certification	CE, FCC, VCCI, MSA
Features
Product colour	Gold, Metallic
Mean time between failures (MTBF)	4650000 h
Hot-Plug support
Logistics data
Shipping (inner) case length	36 cm
Shipping (inner) case width	26 cm
Shipping (inner) case height	31 cm
Shipping (inner) case net weight	3.2 kg
Products per shipping (inner) case	50 pc(s)
Pallet gross weight (air)	272 kg
Master (outer) cases per pallet (air)	60 pc(s)
Products per pallet (air)	3000 pc(s)
Pallet gross length	102 cm
Pallet gross width	122 cm
Pallet height (air)	199 cm
Pallet gross weight (sea)	272 kg
Master (outer) cases per pallet (sea)	60 pc(s)
Products per pallet (sea)	3000 pc(s)
Pallet height (sea)	199 cm
Shipping (inner) case gross weight	4.2 kg
Harmonized System (HS) code	85369010
Operational conditions
Operating temperature (T-T)	0 - 70 °C
Storage temperature (T-T)	-40 - 85 °C
Operating relative humidity (H-H)	5 - 85%
Storage relative humidity (H-H)	5 - 95%
Packaging data
Package width	74 mm
Package depth	131 mm
Package height	49 mm
Package weight	64 g
Performance
SFP transceiver type	Fiber optic
Maximum data transfer rate	10000 Mbit/s
Interface type	SFP+
Fiber optic connector	LC
Fiber cable diameters supported (core/cladding)	9/125 µm
SFP transceiver standard	LR
Maximum transfer distance	10000 m
Wavelength	1310 nm
Tx power (min)	-8.5 dBmW
Tx power (max)	0.5 dBmW
Rx power (min)	-12.6 dBmW
Rx power (max)	0.5 dBmW
Link budget	10.1 dB
Networking standards	IEEE 802.3ae
Fiber ethernet cabling technology	10GBASE
Duplex system	Full
Single-mode fiber (SMF) supported
Multi-mode fiber (MMF) supported
Power
Maximum voltage	3.3 V
Maximum current	300 A
Weight & dimensions
Width	14.8 mm
Depth	11.8 mm
Height	56.5 mm
Weight	19.5 g

D-Link's 10 G SFP+ module series are hot-swappable SFP+ transceivers that plug into SFP+ slots on switches and support 10 G Ethernet. The D-Link 10GBase SFP+ module series transceivers offer customers a wide variety of 10 G Ethernet connectivity options for data centers, enterprise wiring closets, and service provider transport applications.

The transceivers use the Enhanced Small Formfactor Pluggable format (SFP+). The SFP+ form factor is smaller than other form factors such as Xenpak, X2, and 10 G XFP, ensuring lower costs, lower power disruption, and higher port density. They provide the necessary signal amplification for data to be transmitted to the network cable from the port, and vice versa, for the port to receive data from the network cable.

All D-Link transceivers are hot-pluggable. You can connect a transceiver while the system is powered on without causing any problems. This permits modules to be added or removed without interrupting the network. The transceivers all support 10G Ethernet, which results in very fast data transmissions of up to 10 Gbit/s. This is 10 times faster than Gigabit Ethernet and enables the switch to handle faster and higher data transmissions, making it very suitable for business needs.