Further information for D-Link DEM-431XT SFP Module 10GE Multi-Mode
Certificates
Compliance certificates
RoHS
Safety
UL, TUV, CDRH
Certification
CE, FCC, VCCI, C-Tick, MSA
Features
Product colour
Gold, Metallic
Mean time between failures (MTBF)
3960000 h
Hot-Plug support
Logistics data
Shipping (inner) case length
36 cm
Shipping (inner) case width
26 cm
Shipping (inner) case height
31 cm
Shipping (inner) case net weight
3.2 kg
Products per shipping (inner) case
50 pc(s)
Pallet gross weight (air)
272 kg
Master (outer) cases per pallet (air)
60 pc(s)
Products per pallet (air)
3000 pc(s)
Pallet gross length
102 cm
Pallet gross width
122 cm
Pallet height (air)
199 cm
Pallet gross weight (sea)
272 kg
Master (outer) cases per pallet (sea)
60 pc(s)
Products per pallet (sea)
3000 pc(s)
Pallet height (sea)
199 cm
Shipping (inner) case gross weight
4.2 kg
Harmonized System (HS) code
85369010
Operational conditions
Operating temperature (T-T)
0 - 70 °C
Storage temperature (T-T)
-40 - 85 °C
Operating relative humidity (H-H)
5 - 85%
Storage relative humidity (H-H)
5 - 95%
Packaging data
Package width
74 mm
Package depth
131 mm
Package height
49 mm
Package weight
64 g
Performance
SFP transceiver type
Fiber optic
Maximum data transfer rate
10000 Mbit/s
Interface type
SFP+
Fiber optic connector
LC
Fiber cable diameters supported (core/cladding)
50/125,62.5/125 µm
SFP transceiver standard
SR
Maximum transfer distance
550 m
Wavelength
850 nm
Tx power (min)
-6.5 dBmW
Tx power (max)
-1 dBmW
Rx power (min)
-11.1 dBmW
Rx power (max)
-1 dBmW
Link budget
10.1 dB
Networking standards
IEEE 802.3ae
Fiber ethernet cabling technology
10GBASE
Duplex system
Full
Single-mode fiber (SMF) supported
Multi-mode fiber (MMF) supported
Power
Maximum voltage
3.3 V
Maximum current
300 A
Weight & dimensions
Width
14.8 mm
Depth
11.8 mm
Height
56.5 mm
Weight
18 g
The D-Link DEM-431XT is an SFP+ transceiver module for use in network switches, supporting 10 Gigabit Ethernet over multimode fibre cables. It is specifically designed for operation in data centres, enterprise networks, and service provider infrastructures where high data rates and reliability are required. The module operates in the 10GBase-SR standard with a wavelength of 850 nm and enables a maximum transmission distance of up to 300 metres when using 50/125 µm fibres, and 33 metres with 62.5/125 µm fibres. The interface is via an LC duplex connector, designed for secure and precise connection with fibre optic cables.
Applications include primarily connecting switches within data centres or local networks, where high bandwidth and low latency are required. The module is compatible with D-Link xStack switch models such as DGS-3620-28PC, DGS-3620-28SC, DGS-3620-28TC, DGS-3620-52P, and DGS-3620-52T, which feature SFP+ slots. The use of multimode fibre makes it particularly suitable for short to medium distances within buildings or between adjacent rooms.
Functions and features in detail include support for full-duplex transmission, meaning data can be transmitted simultaneously in both directions without impairing transmission. The module is hot-pluggable, meaning it can be replaced during operation without interrupting network service. This is especially important for network maintenance and expansion without downtime. The Digital Diagnostic Monitoring (DDM) function enables real-time monitoring of critical parameters such as power consumption, transmit and receive power, temperature, and voltage, simplifying network monitoring and fault diagnosis.
Technology explained simply shows that the DEM-431XT is designed in SFP+ format (Enhanced Small Form-factor Pluggable), offering a compact form factor compared to older modules such as XFP or X2. This results in higher port density in switches, lower costs, and reduced energy consumption. The maximum data transfer rate is 10,000 Mbit/s (10 Gbit/s), which is ten times faster than Gigabit Ethernet. The transmitter power ranges from -6.5 dBmW (min) to -1 dBmW (max), while the receiver power ranges from -1 dBmW (min) to -11.1 dBmW (max). The link budget is 10.1 dB, which determines the maximum distance considering signal losses.
Compatibility and accessories refer to use in D-Link switches with SFP+ slots. It is specifically designed for multimode fibres and does not support single-mode fibres. Connection is via LC connectors, which are standard for multimode systems. The certifications include CE, FCC, VCCI, C-Tick, MSA, UL, TUV, CDRH, and RoHS compliance, confirming adherence to international safety and environmental standards.
Installation and mounting is done by simply inserting the module into the SFP+ port of a compatible switch. Due to the hot-plug function, this can be done during operation. It is important that the module is inserted into an SFP+ slot that supports 10 Gigabit Ethernet. Physical installation requires no tools, as the module is directly pushed into the slot and locked in place.
Operational advantages include high data rate, compact design, hot-plug functionality, and integrated diagnostic function (DDM). The low power consumption of up to 3.3 V and 300 A (maximum current) contributes to efficiency. The mean time between failures (MTBF) is 3,960,000 hours, indicating high reliability. The operating temperature ranges from 0 to 70 °C, and storage temperature from -40 to 85 °C, enabling broad usability in various environments. Relative humidity during operation is 5 to 85 %, and during storage 5 to 95 %.
The module is housed in a metallic gold-coloured housing, designed to be robust and suitable for use in IT infrastructures.