| General |
| Memory capacity | 240 GB |
| SSD form factor | 2.5" |
| Height | 7 mm |
| Data transfer rate | 6 Gbit/s |
| Reading speed | 540 MB/s |
| Write speed | 500 MB/s |
| Technology | 3D TLC |
| Interface | SATA-6 Gb/s |
| Component for | PC |
The Crucial BX500 is an internal SSD with a storage capacity of 240 GB, designed for use in PCs. The device features a 2.5-inch form factor with a height of 7 mm, making it suitable for installation in standard notebooks, desktop PCs, and other computers with corresponding drive bays. The SSD uses the SATA-6 Gb/s interface, enabling a maximum data transfer rate of 6 Gbit/s. This interface is widely used and provides sufficient bandwidth for everyday applications such as operating system booting, program launching, and file management.
SSD
The Crucial BX500 is a Solid-State Drive (SSD), which, unlike traditional hard disk drives (HDDs), has no moving parts. This allows it to achieve higher speeds for read and write operations, operate more quietly, and be more robust against mechanical stress. The memory cells are based on 3D TLC technology, which enables higher storage density and reduces the cost per gigabyte. This technology is suitable for use in private and small office environments, where a balanced combination of performance and price is important.
Read and Write Speeds
The SSD achieves a maximum read speed of 540 MB/s and a write speed of 500 MB/s. These values refer to sequential access and are typical for SATA SSDs of this class. The speeds result in significantly faster system response, shorter application startup times, and more efficient file transfer compared to traditional hard drives. These values are sufficient for use in everyday computers and office PCs, where high speeds are not necessarily required.
SATA-6 Gb/s Interface
The SATA-6 Gb/s interface (also known as SATA III) enables a maximum data transfer rate of 6 Gbit/s. This interface is typically available in modern motherboards and computers and fully supports the SSD. The SATA-6 Gb/s interface is backward compatible with SATA II and SATA I, meaning the SSD can also function in older systems with the appropriate connection, although at reduced speeds.
Compatibility and Accessories
The Crucial BX500 is designed for use in PCs and can be installed in computers with a 2.5-inch drive bay. The height of 7 mm matches the standard for internal SSDs and allows use in many devices, including slim notebooks and compact desktop systems.
Mounting and Installation
The SSD is installed by mechanically mounting it into the 2.5-inch bay of the computer, where it is secured using screws or a mounting system. The electrical connection is made via a SATA data cable and a SATA power cable, which are connected to the motherboard and power supply. Installation does not require any special software or drivers; the operating system automatically detects the SSD. The SSD is designed for use in standard PCs, with no special mounting instructions or tools required.
Operational Advantages
The SSD offers higher reliability compared to traditional hard drives, as it has no moving parts. Lower heat generation and quieter operation contribute to a longer system lifespan. Fast access times improve the user experience, especially during operating system boot and program launching. The SSD is suitable for use in office environments, home computers, and small workstations, where balanced performance and reliability are required.