• Input: USB Gen 1 Type-C plug (connection to host) • Output: 1x HDMI socket, 1x DisplayPort socket, 2x USB Gen 1 Type-A socket, 1x RJ45, 1x SD/Micro SD 3.0, 1x USB Gen 1 type -C socket • Supports DP1.4 Alt mode max. 8K@30Hz (with DSC1.2) • Supports HDMI max. 8K@30Hz (with DSC1.2) • Supports dual display HDMI+ DP max.4K60Hz (MST with DSC1.2 ) • Max. 5Gbps data transfer per USB Gen 1 Type-A port • Supports max. 7.5W (5V/1.5A) downstream charging, 2 USB Gen 1 Type-A share max. 1.5A Output • Supports Gigabit Ethernet 10M/100M/1000M • Supports SD3.0 UHS-I with a data rate of up to 832Mbps/104MB/s, allows 2 card slots to operate simultaneously • Supports PD3.0 with max. 100W PD charging • NOTE: Please make sure your host supports DP1.4 Alt mode • Input: • 1x USB Gen 1Type-C Male (Connect to host) Supports DP1.4 Alt mode Note: To get maximum bandwidth, the host should support DP1.4 Alt mode • Output(s): • 1x HDMI Supports max. 8K30Hz • 1x DisplayPort Supports max. 8K30Hz Supports Dual Display HDMI+ DP max.4K60Hz (MST with DSC1.2) Note: The maximum Resolution of the display is determined by the computer and the monitor • 2x USB Gen 1 Type-A Max. 5Gbps data transfer per port Supports max. 7.5W (5V/1.5A) downstream charging 2 USB Gen 1 Type-A ports share one maximum output of 1.5A Supports short circuit, overcurrent and overvoltage protection • 1x RJ45 Supports Gigabit Ethernet, 10M/100M/1000M • 2x SD/Micro SD 3.0 Supports UHS-I with a data rate of up to 832Mbps/104MB/s Enables the simultaneous operation of 2 card slots • 1x USB Gen 1 Type-C socket (for PD charging) Supports max. 100W PD3.0 charging Supports Fast Role Swap, the connected device is not interrupted when plugging and unplugging the PD charger • Packaging size: 7x32x3.5cm • Cable length: 18cm • Total length: ± 31.6cm • Dimensions of the hub: 13x4.5x1.4cm • Product dimension: 3.4x1.2x0.65cm • Product weight: 82g • Packaging weight: 42g • Weight of the LDPE bag: 6g • Total weight: 130g • Meets ROHS, FCC and CE-EMI requirements