| General |
| Norm | ISO 7093, EN 27093, DIN 9021 N |
| Material | Steel |
| Surface coating | Galvanized |
| Inner diameter | 6,4 mm |
| Outer diameter | 18 mm |
| Thread | M6 |
The washer from manufacturer Cimco, type 192652, is a standard fastening component for screws with M6 thread. It complies with standards ISO 7093, EN 27093, and DIN 9021 N, also known as fender washers. These washers serve to distribute pressure under the screw head or nut contact surface, preventing material deformation and damage to sensitive surfaces. Their use is common in electrical and IT installations as well as in mechanical engineering, where even load distribution and secure fastening are required.
Washer
The washer is made of steel and zinc-plated, providing a basic corrosion protection layer. The zinc plating increases resistance to moisture and oxidation, especially in indoor or slightly damp environments. The geometric design conforms to DIN 9021 N, with an outer diameter approximately three times the thread diameter. For screw size M6, this results in an outer Ø of 18 mm and an inner Ø of 6.4 mm, matched to the screw thread.
Applications
These washers are used in the installation of electrical systems, such as securing enclosures, distribution boxes, or network components. They are also suitable for mechanical assembly of devices and machines where even load distribution under the screw head contact is required. Their use in electrical installations is particularly relevant, as they enhance the integrity of fastening screws and minimize the risk of material damage to sensitive components.
Functions and Features in Detail
The washer primarily serves load distribution. By increasing the contact surface area, the pressure force transmitted by the screw to the component is spread over a larger area. This prevents indenting or damaging the surface, especially when fastening to soft or sensitive materials such as sheet metal or plastic. The inner opening of 6.4 mm is specifically designed for screws with M6 thread to ensure a secure fit.
Technology Explained Simply
The zinc plating of the steel washer provides electrochemical corrosion protection. When in contact with moisture, a protective layer forms that shields the iron from oxidation. The flat shape of the washer, with an outer Ø of 18 mm, ensures that the load is distributed over a larger surface area. This is especially important when fastening to thin or soft materials, where local deformation could otherwise occur.
Compatibility and Accessories
The washer is specifically designed for screws with M6 thread. It is used in conjunction with M6 screws to enhance fastening security. The DIN 9021 N standard is internationally recognized and ensures interoperability with other components manufactured to these standards.
Installation and Mounting
Installation is performed by simply placing the washer under the screw head or under the nut before screwing in the screw. The washer must lie securely on the surface to fulfill its function. It is typically used in combination with a screw or nut, with the fit ensured by the precise matching of the inner Ø of 6.4 mm to the M6 thread.
Operational Advantages
Using this washer increases the service life of the fastening, as material deformation is avoided. The zinc-coated surface provides basic protection against corrosion, improving durability in damp environments. Standardization according to DIN 9021 N and ISO 7093 ensures universal applicability across various industries and applications.