Cimco 192651, EAN: 4021103926512

Cimco 192651 Washer M5 15 mm zinc-plated

Installation > Fixing hardware > Screw

Cimco 192651 Washer M5 15 mm zinc-plated

Lieske Part No. 105420
Mfg Part No 192651
EAN-Code 4021103926512
Manufacturer Cimco
Here only 15,36 EUR
18,28 EUR incl. VAT

Further information for Cimco 192651 Washer M5 15 mm zinc-plated

General
NormISO 7093, EN 27093, DIN 9021 N
MaterialSteel
Surface coatingGalvanized
Inner diameter5,3 mm
Outer diameter15 mm
Thread sizeM5
The washer from manufacturer Cimco, type 192651, is a standard fastening component for screws with an M5 thread. It complies with standards ISO 7093, EN 27093, and DIN 9021 N, also known as fender washers. These washers serve to evenly distribute pressure between the screw and the substrate, thereby reducing stress on the contact surface and minimizing the risk of material deformation or cracking. The washer is made of steel and zinc-plated, providing a basic corrosion protection layer, particularly suitable for environments with low to moderate humidity.

Applications
The M5 washer is used in the electrical and installation industry as well as in machine building, where secure and even fastening of components is required. It is especially suitable for applications where the screw connection is made on a soft or sensitive surface, such as wood, plastic, or thin metal sheets. Using the washer prevents the screw head from sinking into the material and protects the surface from damage.

Functions and Features in Detail
The washer has an outer diameter of approximately 15 mm, which is about three times the thread diameter (M5). The inner diameter is 5.3 mm, ensuring a secure fit on the M5 screw. The zinc-plated surface offers protection against corrosion and is suitable for use in indoor environments and protected outdoor areas. The fender washer design enables stable load distribution and prevents the screw from shifting under load.

Technology Explained Simply
The washer functions as an intermediate layer between the screw and the substrate. During installation, it is placed under the screw head or nut surface. Due to the larger surface area of the washer, the screw's pressure force is distributed over a wider area. This reduces local stress and prevents indenting or damaging the surface. The zinc-plated steel surface provides a simple but effective corrosion protection, which, however, is not designed for permanent moisture or aggressive environments.

Compatibility and Accessories
The washer is specifically designed for screws with an M5 thread. It is compatible with all screws complying with standards DIN 9021 N, ISO 7093, or EN 27093. Use with other screw sizes is not intended and may result in poor fit or damage. The washers are available in a packaging unit (VE) of 100 pieces, making them suitable for series assembly or larger projects.

Installation and Mounting
Installation is done by simply placing the washer under the screw head or nut surface before tightening the screw. The washer should be clean and free of deformations to ensure optimal performance. During installation, care should be taken to avoid damaging the washer, as this could impair load distribution. The use of an appropriate screwdriver or electric screwdriver is recommended to ensure even torque distribution.

Operational Advantages
Using the M5 washer according to DIN 9021 N leads to improved fastening security and longer service life of the connection. Even load distribution reduces the risk of material fatigue and prevents the screw from shifting under load. The zinc-plated surface provides simple corrosion protection, which is sufficient for many industrial and craft applications. Standardization according to DIN 9021 N ensures worldwide uniform quality and interchangeability.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/105420
qrcode für Cimco 192651 Washer M5 15 mm zinc-plated