Cimco 190832, EAN: 4021103908327

Cimco 190832 Machine Screw M4/16 mm Zinc-Plated

Installation > Fixing hardware > Screw

Cimco 190832 Machine Screw M4/16 mm Zinc-Plated

Lieske Part No. 903814
Mfg Part No 190832
EAN-Code 4021103908327
Manufacturer Cimco
Here only 13,26 EUR
15,78 EUR incl. VAT

Further information for Cimco 190832 Machine Screw M4/16 mm Zinc-Plated

General
Degree of protectiongalvanically zinc-coated
Quality class4,8
ThreadM4 mm
Slot dimension7,0x1,2 mm
ManufacturerCimco
NormDIN 84, Type A
Materialtempered steel
The cylinder screw 190832 from Cimco is a standardised fastening screw manufactured in accordance with DIN 84, type A, as well as the standards ISO 1207 and EN 21207. It is used for secure connection of components in the electrical and installation industry, particularly in applications requiring a mechanically stable and corrosion-resistant fastening. The screw is made of case-hardened steel and galvanically zinc-plated, providing high strength and protection against environmental influences such as moisture. The design features a slot for mounting with a screwdriver.

Applications

The screw is suitable for use in electrical installation, machine building, and general assembly where a reliable mechanical connection is required. Due to the galvanic zinc plating, it is also suitable for applications with moderate corrosion risk, for example in indoor environments or protected outdoor areas. The DIN 84 type A standard defines the geometric dimensions and shape of the screw, characterised by a cylindrical shank and a flat head plate.

Functions and Equipment in Detail

The screw has a thread diameter of M4 mm and an overall length of 16 mm, where the screw length refers to the total length from head to tip. The slot dimensions are 7.0 mm in width and 1.2 mm in depth, enabling secure and precise mounting with a matching screwdriver. The grade 4.8 indicates the material’s mechanical properties, particularly tensile strength and yield strength, and is sufficient for general fastening tasks.

Technology Explained Simply

The galvanic zinc plating protects the screw from oxidation and corrosion by applying a thin zinc layer on the surface. This extends the screw’s service life, especially in damp or slightly corrosive environments. The case hardening of the steel increases the material’s strength and hardness, enabling the screw to withstand mechanical loads. The DIN 84 type A standard defines the geometric dimensions, including head shape, shank length, and thread, to ensure universal usability.

The screw is designed for use in standard drilled or tapped holes, with hole diameters corresponding to the M4 thread. It is used in conjunction with matching nuts or tapped holes to ensure a secure connection.

Compatibility and Accessories

The screw is compatible with all components featuring an M4 thread hole. It can be combined with standard nuts, e.g. according to DIN 934, or tapped holes. Use with other screwdriver or bit systems is not intended, as the screw can only be mounted with a slotted screwdriver.

Mounting and Installation

Mounting is performed by inserting the screw into the pre-drilled or pre-tapped hole and then tightening with a slotted screwdriver. The screw is designed for single-use mounting; re-use is not recommended, as the mechanical properties may be impaired by repeated tightening.

Advantages in Operation

The screw provides a reliable and cost-efficient fastening solution for general assembly tasks. The galvanic zinc plating ensures a long service life under normal environmental conditions. Standardisation according to DIN 84 type A ensures interchangeability with other screws of the same type, simplifying inventory management and replacement. The simple mounting with a slotted screwdriver makes it easy to handle for tradespeople and technicians.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/903814
qrcode für Cimco 190832 Machine Screw M4/16 mm Zinc-Plated