| General |
| Degree of protection | Galvanized |
| Material | hardened steel |
| Screw head | Half-round/oval head |
| Slot type | Phillips cross recess |
| Slot size | 2 |
| Drill screw | Self-tapping |
| Norm | DIN 7504 m (formerly N) |
| Thread | DIN 7970 |
| Diameter | 4,2 mm |
The sheet metal screw 190424 from Cimco is a self-tapping screw manufactured according to DIN 7504 m (formerly N). It is used for fastening sheet metal and metal parts, particularly in electrical and IT installations, where a secure and durable connection is required. The screw is made of hardened steel and is zinc-plated, providing high mechanical strength and corrosion protection. The countersunk or pan head with Phillips cross recess allows for precise and secure assembly using a matching screwdriver. The thread conforms to DIN 7970, specifically developed for sheet metal screws, ensuring optimal anchoring in thin metal plates.
Sheet metal screw
The screw is designed as a self-tapping screw, meaning it can be screwed into the material without pre-drilling. This saves time and effort, especially when mounting metal sheets in electrical installations or securing devices to metal walls. The drilling capability is achieved through the special cutting edge on the screw shank, which cuts into the material while simultaneously forming the thread.
Functions and equipment in detail
The screw has a shaft diameter of 4.2 mm and an overall length of 19 mm. The head shape is either countersunk or pan, allowing for a flush seating surface on the workpiece. The Phillips cross recess is size 2, enabling use with standard screwdrivers or power tools equipped with a PZ2 bit. The zinc-plated surface provides effective protection against moisture and oxidation, especially in indoor environments with normal ambient humidity.
Technology explained simply
The use of hardened steel ensures high strength and resistance to breakage or deformation under load. The zinc plating protects the screw from corrosion, extending the service life of the fastening. The thread according to DIN 7970 is specifically designed for sheet metal materials and ensures secure anchoring without the risk of overcutting or loosening. The self-tapping feature reduces installation effort, as no pre-drilling is required.
Compatibility and accessories
The screw is suitable for fastening sheet metal and metal plates, particularly in electrical and IT installations. It can be used with standard screwdrivers or power tools equipped with a Phillips bit size 2. Use in combination with washers or other fastening elements is possible if required by the application. The screw is not intended for use in wood or other non-metallic materials.
Installation and mounting
Installation is performed by inserting the screw into the material to be fastened and then tightening it with a Phillips screwdriver or a power tool with a PZ2 bit. The self-tapping feature allows direct screwing without pre-drilling. The screw should be tightened until it seats fully to ensure a secure connection. The use of tools with appropriate torque control is recommended to avoid overloading.
Advantages in operation
The sheet metal screw 190424 provides a reliable fastening solution for metallic components in electrical and IT installations. The self-tapping feature reduces installation effort and speeds up work processes. The zinc plating ensures long service life and resistance to corrosion. The use of hardened steel guarantees high mechanical strength, which remains intact even under load. The screw is available in a pack of 100 pieces, making it suitable for series assembly and larger projects.