General
Maximum cable tie width	5,5 mm
Maximum screw diameter	4 mm
Colour	natural colour
Scope of delivery	100 pieces
Mounting type	Adhesive

The Cimco mounting plinth type 181384 is a natural-coloured adhesive plinth with dimensions 27 mm × 27 mm, specifically designed for mounting cable ties and screws in installation systems. It serves as a secure mounting base for cable ties with a maximum width of 5.5 mm and screws with a diameter up to 4 mm. Installation is carried out using an adhesive backside, enabling safe and permanent attachment to smooth surfaces. The plinth is available in a pack of 100 pieces and is particularly suitable for use in electrical and IT installations, where clean and structured cable routing is required.

Mounting plinth

The mounting plinth is a flat, square component with an adhesive underside. This allows for quick and tool-free installation on suitable substrates such as metal, plastic, or painted surfaces. The dimensions of 27 mm × 27 mm provide sufficient space for mounting cable ties and screws, with a maximum cable tie width of 5.5 mm. The screw mounting is designed for diameters up to 4 mm, covering a wide range of standard screws used in electrical and IT applications.

Applications

The plinth is typically used in electrical installations, IT infrastructure, and industrial cable routing. It is especially useful when cable ties need to be mounted at locations where no drilling or screw holes are available. The adhesive mounting allows for flexible positioning without structural modifications to the substrate. Typical application sites include enclosures, server rooms, machine constructions, or wall cladding, where orderly cable routing is required.

Functions and equipment in detail

The plinth features a robust, natural-coloured surface that blends well visually in technical environments. The adhesive backside is designed for permanent adhesion and enables easy installation without additional tools. The pack contains 100 pieces, allowing for economical use in larger installations.

Technology explained simply

The technology of the mounting plinth is based on adhesive mounting. The backside is coated with an adhesive that is applied directly to the surface after removing the protective film. Adhesion is achieved through pressure and contact, with the surface needing to be clean and free of grease to ensure optimal bonding. The square shape with 27 mm side length provides sufficient surface area for mounting cable ties and screws, with maximum dimensions of 5.5 mm (cable tie) and 4 mm (screw) defining the usage limits.

Compatibility and accessories

The plinth is compatible with cable ties up to 5.5 mm width and screws up to 4 mm diameter. It can be used in combination with standard cable ties and screws commonly used in electrical and IT applications. Installation is independent of other components, with direct mounting onto the surface.

Mounting and installation

Installation is tool-free. The protective film on the adhesive backside is removed and the plinth is pressed onto the desired location on the surface. A short pressing pause ensures optimal adhesion. Cable ties or screws are then mounted directly onto the plinth. The surface should be clean, dry, and free of grease to ensure a durable connection. Installation is quick and requires no additional tools.

Advantages in operation

Using the mounting plinth enables quick and flexible installation without structural modifications to the substrate. The adhesive mounting reduces installation time and avoids drilling, which is particularly beneficial for sensitive or completed installations. The natural-coloured surface blends visually into technical environments, and the pack of 100 pieces offers an economical solution for larger projects. The mounting is durable and provides secure holding for cable ties and screws within standard dimensions.