Further information for Cimco 180532 fork cable lugs 1,5-2,5-4
General
Surface protection
Tinned
Tube seam
Hard soldered
Connection thread size
4 mm
Nominal cross section
1,5 - 2,5 mm²
Flange shape
Fork shape
Sleeve form
Short
Min. AWG-size
16
Max. AWG-size
14
Insulation
None
D1
2,3 mm
D3
4,3 mm
A
5 mm
B
6,8 mm
S
0,8 mm
Useful for stranded conductors
Suitable for fine strand conductors
Suitable for solid cores
Suitable for round conductors
Suitable for flat conductors
For pull protected connections
Halogen free
Suitable for high temperatures (to 650 °C)
Suitable for insulated varnish
Complies with DIN
The fork cable lug of the brand Cimco, article number 180532, is a crimp cable lug in fork shape, specifically designed for use in electrical connections. It is intended for secure and strain-relieved fastening of conductors to connection bolts with a diameter of 4 mm. The cable lug is designed for conductor cross-sections between 1.5 mm² and 2.5 mm² and is particularly suitable for multi-strand and fine-strand round conductors. The use of solid conductors is not intended. The construction with short sleeve shape and hard-soldered sleeve seam ensures a stable and durable connection, suitable for applications in the field of electrical installation. The surface is galvanically tinned, providing corrosion protection and good electrical conductivity. The material corresponds to Cu-TP according to DIN EN 13600, a standard for copper conductors in electrical engineering. The connection is not designed for strain-resistant applications, but for strain-relieved mounting, where the mechanical load is taken over by other fastening elements.
Fork cable lug is the designation for the product, characterised by its distinctive shape with two parallel flanges (fork) at the end of the cable lug. This shape enables secure fastening to screw connection points, particularly in switches, sockets or other electrical components. The connection thread size is 4 mm (metric), representing a standard size in electrical installation. The overall length of the cable lug is 12 mm, with dimensions D1 (2.3 mm), D3 (4.3 mm), A (5 mm), B (6.8 mm) and S (0.8 mm) describing the geometric parameters relevant for mounting and fit.
Cross-section range of 1.5 to 2.5 mm² makes the cable lug suitable for a variety of applications in low-voltage installation. It is specifically designed for multi-strand and fine-strand conductors, typically used in flexible cables or installation wiring. The use of enamel wire or flat conductors is not intended. The connection is not designed for high temperatures (up to 650 °C), meaning the cable lug is not suitable for applications in extremely hot environments. Insulation is not present, indicating that the cable lug is designed for use with insulated conductors, where the insulation is removed before processing.
Technical execution is based on a copper material (Cu-TP) according to DIN EN 13600, known for its electrical conductivity and mechanical strength. The galvanic tinning of the surface provides corrosion protection and improves contact quality. The hard-soldered sleeve seam increases mechanical stability and prevents the sleeve from opening under load. The connection is designed for strain-relieved applications, meaning the mechanical load is taken over by other fastening elements (e.g. screws or clamps), not by the cable lug itself. The statement “complies with DIN” refers to the material and manufacturing norm conformity, although no specific norm designation is provided in the datasheet.
Compatibility and accessories refers to use with connection bolts of 4 mm diameter. The connection is suitable for round conductors, but not for flat conductors or solid conductors. The AWG size indications (min. 16, max. 14) specify the corresponding American conductor cross-section, equivalent to the European range of 1.5 to 2.5 mm². The use in combination with other cable lugs or accessory parts is not specified in the datasheet, so no additional compatibility is described.
Mounting and installation is carried out by crimping, where the cable lug is applied to the conductor using suitable tools (e.g. cable cutter or crimping pliers). The connection is then fastened to a screw connection with 4 mm thread. The strain-relieved design requires that the mechanical load is taken over by other fastening elements (e.g. screws) to ensure a durable and secure connection. Use in electrical installation is in accordance with applicable regulations and standards.
Operational advantages include simple and secure mounting, high electrical conductivity due to the copper material, and corrosion protection through galvanic tinning. The hard-soldered sleeve seam increases mechanical stability and extends the service life of the connection. Use for strain-relieved applications reduces load on the cable lug and increases connection reliability. Halogen-free is an additional property beneficial for disposal and in case of fire.