Classic tool case 'Electronics' with tool assortment. Tool case equipment 1x each: 1000 V telephone pliers with straight jaws 200 mm, DIN ISO 5745 (10 0216) 1000 V side cutters 16 mm, DIN ISO 5749B (10 0574), paint stripper for wires ø 0.6 mm (AWG 22) (10 0712), JOKARI wire strippers Super 4 (10 0760), electronics side cutters up to 1.3 mm ø, 21°, 132 mm (10 1040), micro electronics needle-nose pliers, curved jaws (10 1076), tweezers, 120 mm (10 3016), offset screwdriver DIN 5200, for slotted screws, 100x5.0x 0.65 mm (11 0620), offset screwdriver DIN 5200, for Phillips screws, PH 1/PH 2x100 mm (11 0630), insulated holding slotted screwdriver, 4.0x0.8x125 mm (11 0784), phase tester 120 - 250 V AC, 3.0/65 mm (11 1280), inspection mirror (11 1600), combination claw gripper total length 700 mm, (usable depth 600 mm) (11 1650) precision slotted screwdriver, white 2.0x0.4x60 mm (11 1864), hexagon socket wrench 210 mm, DIN 3125, SW 5.5x125 mm (11 7205), hexagon socket wrench 220 mm, DIN 3125, SW 7x125 mm (11 7207), hexagon socket wrench 220 mm, DIN 3125, SW 8x125 mm (11 7208), hexagon socket wrench 220 mm, DIN 3125, SW 10x125 mm (11 7210)1000 V slotted screwdriver 185 mm, DIN EN 60900, 3.0x0.5 mm (11 7702), 1000 V slotted screwdriver 185 mm, DIN EN 60900, 4.0x0.8 mm (11 7704), 1000 V slotted screwdriver 220 mm, DIN EN 60900, 5.5x1.0 mm (11 7705), 1000 V Phillips screwdriver PH 1, 80 mm, DIN 7438 (11 7731), 1000 V Phillips screwdriver PH 2, 100 mm, DIN 7438 (11 7732), 1000 V Phillips screwdriver PZ 1, 80 mm (11 7741), 1000 V Phillips screwdriver PZ 2, 100 mm (11 7742)Cable shears DUOCUT, 160 mm with two-stage cutting area (12 0108), Universal shears 190 mm, hardness HRC 56 to 58 (12 0122), 1000 V Safety cable knife, straight strong blade, 50 mm (12 1042), JOKARI cable knife, 8 - 28 mm ø (12 2016) Weight: 7,150 g, W/D/H: 487/425/233 mm, internal dimensions W/D/H1/H2/H#: 470/348/125/85/210 mm