| General |
| Stripping | 5,5-13 mm Ø |
| Insulation | 0,2-4,0 mm² |
| Compatibility | Data and control lines, telecommunication lines, system cables, damp room lines |
| Material | NYM, NYY, NHXMH halogen-free |
The Cimco Jokari® wire stripper PC-STRIP, type 120034, is a specialised tool for precise stripping and insulation removal of cables and conductors. It is designed primarily for processing data and control cables, telecommunications cables, and system cables in the field of building installation. The tool is intended for processing cables with fixed installations, flexible cables, and damp environment cables such as NYM, NYY or NHXMH halogen-free. It enables stripping of cables with a diameter of 5.5 to 13 mm and insulation removal of individual conductors with cross-sections from 0.2 to 4.0 mm², corresponding to AWG range 26 to 11.
Applications
The wire stripper PC-STRIP is designed for use in electrical and IT installation, particularly for cable laying in buildings where clean and precise processing of insulation is required. It is suitable for solid single conductors as well as for cables with multiple conductors intended for fixed installation. Its use with damp environment cables demonstrates its adaptability to demanding environments where cables are often laid under increased humidity.
Functions and Equipment in Detail
The tool enables precise stripping of cables with diameters from 5.5 to 13 mm, while insulation removal of individual conductors with cross-sections from 0.2 to 4.0 mm² is possible. The stripping is performed using a special cutting edge designed for precise removal of insulation without damaging the conductor. The tool design ensures clean processing even with flexible cables. The indication of AWG values (26 to 11) complements the mm² specification and allows better assignment for users familiar with American standards.
Technology Explained Simply
The wire stripper operates using a mechanical cutting technique, where the insulation is removed by a precise blade while the conductor remains undamaged. The tool geometry is tailored to the specified diameter and cross-section ranges to ensure uniform and secure processing. Its use with halogen-free cables such as NHXMH shows that the tool is also suitable for materials with special fire protection requirements. Stripping is achieved via a special guide that detects the cable diameter and enables uniform cutting depth.
Compatibility and Accessories
The tool is compatible with a wide range of cable types, particularly data and control cables, system cables, and damp environment cables. It can be used with cables employed in building installation, such as NYM, NYY or NHXMH. Suitable accessories available in the range include Cat7 cables in various lengths and packaging formats, such as 1000m reels or 100m cartons, suitable for network cabling. These cables are configured as S/FTP (shielding: pair-shielded, overall shielding) and comply with Category 7 with a bandwidth of 1000 MHz.
Mounting and Installation
Mounting of the wire stripper is performed by simply placing the tool onto the cable and pressing the blade, thereby cutting the insulation. The tool guide ensures the cutting depth is correct and the conductor is not damaged. Use requires no additional tools or accessories. Handling is simple and does not require special prior knowledge, with precision ensured by the special tool design.
Advantages in Operation
The PC-STRIP wire stripper offers high precision in stripping and insulation removal, resulting in clean and secure processing. Its use with various cable types, including halogen-free cables, demonstrates the tool’s versatility. The coverage of a broad diameter and cross-section range (5.5–13 mm and 0.2–4.0 mm²) enables application in various installation scenarios. The mechanical cutting technique ensures reliable and repeatable processing, enhancing the quality of the connection.