General
Rated current	10 kA

Replacement fuses in 6x32 mm format from Chauvin Arnoux are designed for use in electrical circuits where precise and reliable protection against overload and short circuit is required. These fuses are specifically designed for applications requiring a tripping current of 200 mA, ensuring the circuit is safely disconnected when this value is exceeded. The fuses are rated for an operating voltage of 1000 V and have a rated current strength of 10 kA, making them suitable for use in high-performance installations. They are supplied in quantities of 20 pieces, making them advantageous for replacement needs in industrial or commercial environments.

Fuse in 6x32 mm format is a standard size in electrical engineering, used in many switching devices and distributors. The dimensions comply with common standards and allow for easy interchangeability. The tripping current of 200 mA means that the fuse will disconnect within the specified time when the current exceeds this value, preventing damage to the electrical installation. This is particularly important in systems containing sensitive electronic components.

Operating voltage of 1000 V makes these fuses suitable for applications in high-voltage networks or industrial distributors where high electrical voltages occur. The rated current strength of 10 kA refers to the maximum current the fuse can withstand for a short period without failure – a critical factor during short-circuit events. The fuses are classified as HPF (High Performance Fuse), indicating high performance and reliability, especially under high current loads.

The fuses are designed for use in electrical circuits requiring precise protection, such as in industrial controls, machine controls, or power distribution. They are particularly suitable for installations where high safety and reliability of power supply are required. Use in combination with appropriate fuse holders or switching devices is necessary to ensure proper function.

Installation is carried out by inserting the fuse into a suitable fuse holder installed in the respective switching system. The fuse must fit securely to ensure a reliable electrical contact. Adherence to the specified operating conditions, especially maximum voltage and current, is essential for proper function.

Using these fuses in operation ensures high safety for the electrical installation. The precise tripping characteristic ensures that power supply is interrupted only during actual hazardous overloads or short circuits, avoiding unnecessary shutdowns. The high rated current strength of 10 kA provides additional protection against sudden current surges, which frequently occur in industrial environments.

The fuses are supplied in quantities of 20 pieces, making them suitable for replacement needs in larger installations or for stock inventory. The packaging is designed to protect the fuses from damage and allow easy removal.

Fuse is the central component protecting the electrical circuit. The tripping current of 200 mA is critical for function, as it defines the threshold at which the fuse disconnects. The operating voltage of 1000 V and the rated current strength of 10 kA are technical specifications determining suitability for high-performance applications. The HPF classification indicates the high performance of the fuse. The format size 6x32 mm is a standard dimension used in many switching devices.

The fuses are not designed for use in consumer electronics or low-voltage installations. They are exclusively intended for industrial or commercial applications where the specified technical parameters are required. Use in other environments may lead to malfunctions or safety risks.

The fuses are supplied in a package containing 20 pieces. The packaging serves exclusively for the protection and transportation of the fuses.

The fuses are designed for use in electrical circuits requiring precise protection. Use in combination with appropriate fuse holders or switching devices is necessary to ensure proper function. Adherence to the specified operating conditions, especially maximum voltage and current, is essential for proper function.

Installation is carried out by inserting the fuse into a suitable fuse holder installed in the respective switching system. The fuse must fit securely to ensure a reliable electrical contact. Adherence to the specified operating conditions, especially maximum voltage and current, is essential for proper function.

Using these fuses in operation ensures high safety for the electrical installation. The precise tripping characteristic ensures that power supply is interrupted only during actual hazardous overloads or short circuits, avoiding unnecessary shutdowns. The high rated current strength of 10 kA provides additional protection against sudden current surges, which frequently occur in industrial environments.

The fuses are supplied in quantities of 20 pieces, making them suitable for replacement needs in larger installations or for stock inventory. The packaging is designed to protect the fuses from damage and allow easy removal.

The fuses are not designed for use in consumer electronics or low-voltage installations. They are exclusively intended for industrial or commercial applications where the specified technical parameters are required. Use in other environments may lead to malfunctions or safety risks.

The fuses are supplied in a package containing 20 pieces. The packaging serves exclusively for the protection and transportation of the fuses.