Eigenschaften
Dimensions	490 x 395 x 195 mm
Weight	10 kg

The Didactic Kit C.A 6710 from Chauvin Arnoux is a device specifically developed for training and education in the field of electrical safety and standardized measurements on electrical installations. It serves as a practical aid for simulating real installation conditions and enables the performance of various measurements as well as the replication of typical installation faults. The design is based on internationally recognized standards such as IEC 60364, NF C 15-100, VDE 0100, IEE 16th, ÖVE EN-1, CEI 64-8, NIN/NIV, and RBT MIE, which are essential for the safety and functionality of electrical installations.

Applications
This kit is primarily designed for use in training institutions, vocational schools, continuing education centers, and for training electricians, installers, maintenance technicians, and engineers. It enables the teaching of knowledge regarding the correct execution of tests on electrical installations, particularly with regard to compliance with current safety regulations. The simulation of realistic scenarios promotes understanding of the operation of earthing systems, residual current circuit breakers, and measurement methods.

Functions and Equipment in Detail
The C.A 6710 simulates various earthing systems, including TT, TN, and IT networks, which are commonly used in practice. It allows for measurements such as earth resistance, loop resistance (both earthing and internal loops), insulation resistance, continuity testing, as well as differential measurements (e.g. 30 mA / 300 mA) and the recording of current and leakage current. The integrated residual current circuit breakers — one non-selective and one selective — are used for simulating and testing fault current responses. Additionally, sockets and safety sockets are provided to safely connect measuring instruments. Adjustable resistors allow the simulation of earthing and ground resistances, which is relevant for testing earthing systems.

Explaining Technology in an Understandable Way
The simulation of installation faults such as phase/neutral or earth disconnection, neutral/earth reversal, or leakage current enables observation of the effects of such disturbances on the safety and functionality of an installation. The electrical safety of the device is rated for Category II at 230 V, meaning it is suitable for measurements on electrical installations within the scope of low-voltage safety. The dimensions are 490 x 395 x 195 mm, the net weight is 10 kg, enabling convenient transport and operation.

Compatibility and Accessories
The kit is designed for use with common measuring instruments, which can be connected via the integrated sockets and safety sockets. The simulation of various earthing systems and fault cases allows testing of devices and protective measures under controlled conditions.

Mounting and Installation
The didactic kit is designed as a stationary device and requires no mounting. It is operated directly, with connections made to the integrated sockets and outlets. Operation is performed via the designated switches, resistors, and connection points, which are intended for simulating various scenarios.

Advantages in Operation
By combining realistic simulations with safe testing conditions, the C.A 6710 provides an efficient and risk-free learning environment. The ability to practice faults and measurement procedures under controlled conditions promotes understanding of the operation of electrical installations and the correct application of testing methods. Compliance with the mentioned standards ensures that training meets current requirements in electrical engineering.