| General |
| Rated current | 0.1 to 1200 A AC |
| Enclosure diameter | 52 mm |
| Output signal | Alternating current |
| Gear ratio | 1000/1 |
| Typical accuracy | ≤ 0,5 % |
| Output | 4-mm insulated terminals with surge protection |
| Safety | IEC 61010, CAT III 600 V |
The C102 current clamp from Chauvin Arnoux is a precise measuring instrument for capturing alternating currents in the range of 0.1 A to 1200 A. It belongs to the "C" series and is specifically designed for use in industrial and office buildings where high measurement accuracy and safety are required. The device enables CAT III 600 V measurements, making it suitable for use on electrical installations in commercial and industrial environments. The round shape of the clamp jaws and the uniform winding of the coil ensure high measurement accuracy with minimal phase shift, which is crucial for reliable measurement results.
Applications
The C102 is ideal for measuring alternating currents in electrical installations, particularly in industrial and service facilities. Due to its clamping diameter of 52 mm, it can be used on most conductors found in these environments. The safety class CAT III 600 V makes it suitable for measurements on energized electrical installations located near main distribution boards or transformer installations.
Functions and Equipment in Detail
The device features a pendulum hinge system that adjusts the magnetic components and improves handling. A patented support system enables progressive, stepless opening of the clamp jaws, enhancing user comfort. The outputs consist of insulated 4-mm sockets equipped with integrated overvoltage protection to safeguard the device and connected measuring instruments from damage caused by voltage spikes.
Technology Explained Simply
The C102 operates as a current transformer with a turns ratio of 1000/1. This means that a current of 1000 A in the primary circuit (in the conductor) generates an output signal of 1 A in the secondary circuit (at the sockets). The typical accuracy is ≤ 0.5 %, ensuring high reliability of the measurement values. The output signal is alternating current, delivered via the 4-mm sockets. The safety standard IEC 61010 and the CAT III 600 V category guarantee that the device is suitable for use in electrical installations with the corresponding voltage class.
Compatibility and Accessories
The C102 can be connected to measuring instruments equipped with 4-mm connectors. Suitable accessories available in the range include a set of two adapters (BNC socket/4 mm plug), enabling connection to devices with BNC connectors. These adapters expand the application possibilities of the C102, particularly when used with oscilloscopes or other measuring instruments that use BNC plugs.
Mounting and Installation
Installation is performed by simply clamping the conductor to be measured with the jaw. The clamp jaws open when pressure is applied to the lever, with the pendulum hinge system and support system ensuring smooth and controlled movement. The jaw is closed around the conductor, and measurement can begin immediately. No additional tools or mounting aids are required.
Operational Advantages
The C102 offers high measurement accuracy and minimal phase shift, which is essential for precise and reliable measurements. The ergonomic design with pendulum hinge system and progressive jaw opening facilitates handling, especially during frequent use. The insulated 4-mm sockets with overvoltage protection increase safety and protect connected devices. The combination of robust design and high accuracy makes the C102 a reliable tool for electricians and technicians in demanding environments.
Scope of Delivery
The scope of delivery includes the current clamp C102 and the operating instructions.