Product Description:

The PAC27 current clamp from the PAC series is a versatile and powerful tool designed for precise measurement of small to high DC and AC currents. The PAC27 leverages Hall-effect technology to accurately measure both DC and AC currents. With an enclosure diameter of 39 mm and the capability to enclose two smaller busbars of 25 mm or 50×5 mm, the clamp is flexible for various applications.

This model is especially suited for use with an oscilloscope, allowing for the display of peak currents up to 1400 A DC with a bandwidth of up to 1400 kHz. The PAC27 features two measurement ranges with a conversion ratio of 1 A/10 mV and 1 A/1 mV, enabling accurate measurements across low and high current ranges. The automatic DC zero adjustment (ZeroDC) enhances accuracy and simplifies operation. The output is delivered through a coaxial cable with an insulated BNC connector, ensuring a secure and reliable connection.

Technical Details:

• Rated current: 100 A AC / 150 A DC – 1000 A AC / 1400 A DC
• Enclosure diameter: 39 mm or 2 x 25 mm or 2 x (50×5) mm
• Input range: 0.5 A to 150 A peak | 0.5 A to 150 A DC | 0.5 A to 1400 A peak | 0.5 A to 1400 A DC
• Output signal: DC and AC voltage
• Conversion ratio: 1 A/10 mV, 1 A/1 mV
• Typical accuracy: ≤ 1.5% | 4%
• Output: Coaxial cable with insulated BNC connector
• Bandwidth: up to 1400 kHz
• Automatic DC zero adjustment (ZeroDC)
• Selectable standby mode

Included Items:

• PAC27 current clamp
• User manual

Special Features:

• Two measurement ranges for flexible and precise readings
• High bandwidth up to 1400 kHz, ideal for oscilloscope use
• Automatic DC zero adjustment for accurate results
• Robust coaxial output with insulated BNC connector
• Energy-saving standby function

Applications:

• Ideal for measuring peak and DC currents in industrial and commercial settings
• Suitable for use with oscilloscopes for current analysis