Highlights:

• Straight and elongated current clamp for measuring very low and small DC and AC currents on cable bundles and in confined spaces
• Enclosure Ø: 11.8 mm
• Input: Measuring range 5 mA…2 A DC | 5 mA…1.5 A AC | 50 mA…80 A DC | 50 mA…60 A AC
• Output signal: DC and AC voltage
• Conversion ratio: 1 A/1 V | 1 A/10 mV
• Output: via cable and connector (Ø 4 mm, insulated)
• With automatic DC zero adjustment and deactivatable auto shut-off
• Power supply via battery or external USB power adapter

Description:

The E25 current clamp utilizes Hall effect technology to accurately measure both DC and AC currents.
It features two measurement ranges, allowing current measurements from a few milliamps up to 80 amps with a bandwidth up to 20 kHz.
The E25 clamp is battery-operated or can be powered by a standard 5V power supply via a micro USB interface, and it includes automatic DC zero correction and an auto shut-off feature when not in use.
Connection to a multimeter or any other measuring device is via a cable with two insulated banana plugs. The clamp can be used on electrical installations rated up to 600V CAT III and 300V CAT IV.

Key technical data:

• Current range: 5 mA to 80 ADC / 60 AAC
• Bandwidth: 20 kHz (-3 dB)
• Enclosure Ø: 11.8 mm