Highlights:

• Compliant with IEC 61010-1, CAT IV-2
• Enables the safe display of high differential voltages up to ± 600 V on an oscilloscope
• Bandwidth: 30 MHz

Description:

The MX 9030 differential voltage probe, which is standalone and connected to ground, is an essential accessory for Class 1 oscilloscopes to display signals without a ground reference. This probe attenuates and converts the input differential voltage into a low voltage available at the BNC output. It is powered by a 9 V battery and uses removable test leads with banana plugs connected at the rear of the device.

Technical Details:

• Bandwidth: 30 MHz
• Attenuation ratio: 1/20 and 1/200
• Input: 1 differential channel / removable cables with banana plugs
• Differential input voltage ranges: ± 0.1 V to ± 600 V
• Input impedance: 2 MΩ – 6 pF
• Common mode rejection: 80 dB at 50 Hz, 50 dB at 1 MHz
• Oscilloscope output: ± 3 V with 1 MΩ load, approx. 1.10 m BNC cable
• Battery operation/life: 1 6LF22 9 V battery / 18 hours
• Installation category/EMC: IEC 61010-1 600 V CAT IV, EMC per DIN EN 61326-1
• Dimensions: 163 x 62 x 40 mm
• Weight: 195 g with battery