| General |
| Nominal current | 630 mA |
| Nominal voltage | 500 V |
| Number | 5 piece |
| Suitable for measurement device types | MX 44 / 56C / 58 / 59 |
This fuse from Chauvin Arnoux is a replacement part for precision measuring instruments and serves as a protective function against current surges and overloads during operation. With a rated current of
630 mA and a rated voltage of
500 V, it is designed for use in electrical measuring systems operating within these electrical parameters. The compact dimensions of
5 x 20 mm allow for easy installation in standard fuse holders, which are incorporated in many measuring instruments. The package contains
5 pcs, ensuring sufficient replacement stock for professional use.
Applications
The fuse is specifically designed for use in measuring instruments from the MX 44, MX 56C, MX 58, and MX 59 model series. These devices are used in electrical engineering and measuring technology, for example, for voltage and current measurement, analysis of electrical parameters, or testing of electrical installations. The fuse protects the internal circuits of these devices from damage caused by sudden current surges or short circuits, thereby increasing the service life and reliability of the measuring instruments.
Functions and Equipment in Detail
The fuse operates according to the principle of thermal or electromagnetic tripping, depending on the design, and interrupts the circuit as soon as the rated current of 630 mA is exceeded. This prevents overheating or destruction of sensitive electronic components in the measuring instrument. The rated voltage of 500 V defines the maximum voltage operation at which the fuse functions safely. The dimensions of 5 x 20 mm correspond to a common fuse format that is standard in many measuring instruments.
Technology Explained Simply
The fuse is a passive protective component installed in series in the circuit. Under normal operating load, it remains closed and conducts current unimpeded. When the current exceeds the rated value of 630 mA, the fuse link inside the fuse melts, interrupting the circuit. The rated voltage of 500 V ensures that the fuse operates safely even at higher voltages in the network, without arcing. The dimensions of 5 x 20 mm allow for easy mechanical fit into the designated holders of compatible measuring instruments.
Compatibility and Accessories
The fuse is specifically developed for measuring instrument types MX 44, MX 56C, MX 58, and MX 59. These models belong to the product range of Chauvin Arnoux and are used in industrial and craft electrical engineering. The fuse is not intended for other devices unless these explicitly meet the same requirements for rated current, rated voltage, and dimensions.
Installation and Mounting
Installation is carried out by inserting the fuse into the designated fuse holder of the measuring instrument. The holder is designed to securely hold the fuse with dimensions 5 x 20 mm. No special tools are required; the fuse can be inserted by hand. When replacing, ensure that the device is switched off and disconnected from the power supply to avoid electrical hazards.
Advantages in Operation
The fuse provides reliable protection for sensitive measuring instruments, thereby increasing operational safety and extending maintenance intervals. The package with 5 pcs ensures sufficient replacement stock, enabling quick response in case of failure without interrupting operations. Compliance with the specified values for rated current and rated voltage ensures that the fuse only trips under actual hazardous overloads, not under normal operating conditions.