| General |
| Nominal current | 10 A |
| Release characteristic | superflink |
| Nominal voltage | 600 V |
| Number | 5 piece |
| Suitable for measurement device types | MTX 3250, MX 20HD / 22 / 23 / 24B / 26 / 44(HD) / 53 / 54C / 553 / 5006 / 5060 |
This fuse from Chauvin Arnoux is a replacement part for professional measuring instruments and serves to protect against excessive current loads. With a rated current of 10 A and a rated voltage of 600 V, it is designed for applications where high electrical loads may occur. The tripping characteristic is defined as
superfast, meaning the fuse reacts very quickly to sudden, strong current surges to protect sensitive measuring instruments from damage. The dimensions of 6 x 32 mm correspond to a common fuse format used in many standard fuse holders, facilitating installation and interchangeability. The packaging contains 5 pieces, enabling practical stock keeping.
Applications
The fuse is specifically designed for use in measuring instruments employed in electrical engineering, industrial environments, or during maintenance work. It protects the internal circuits of the devices from short-term overloads caused by short circuits, overvoltages, or other electrical disturbances. Compatibility with a wide range of models from the MX and MTX series highlights its universal usability in professional working environments.
Functions and Equipment in Detail
The
superfast tripping characteristic ensures that the fuse trips quickly even at slight overloads of the rated current, which is particularly important for sensitive electronic components. The rated voltage of 600 V covers a broad voltage range sufficient for many industrial and craft applications. The fuse is manufactured in a standard format of 6 x 32 mm, fitting into most fuse holders of this design.
Technology Explained Simply
The term
superfast describes the fuse’s very rapid response time under current overloads. Unlike standard fuses, which trip only after a certain delay when the rated current is exceeded, a superfast fuse reacts immediately at minor overloads to protect sensitive electronic components. The rated voltage of 600 V means the fuse is designed for operating voltages up to this value and provides the required insulation strength.
Compatibility and Accessories
The fuse is suitable for a range of measuring instruments from Chauvin Arnoux, including models MTX 3250 and various MX models such as MX 20HD, 22, 23, 24B, 26, 44(HD), 53, 54C, 553, 5006, and 5060. This compatibility enables use in various measuring environments, from electrical installations to industrial diagnostics. The fuse is intended as a replacement part and is not supplied as part of a complete device.
Installation and Mounting
Installation is carried out in standard fuse holders integrated into the mentioned measuring instruments. The dimensions of 6 x 32 mm fit into the usual holders of this design. The fuse is mounted by simply inserting it into the holder, ensuring correct alignment and a secure connection. No additional tools or mounting aids are required.
Advantages in Operation
The
superfast tripping characteristic provides a high level of protection for sensitive measuring instruments. The packaging of 5 pieces enables efficient stock keeping, allowing for quick replacement in case of failure. The standard dimensions of 6 x 32 mm ensure universal usability in various devices. The rated voltage of 600 V covers a broad range of applications without requiring additional fuses for different voltage ranges.