| General |
| Nominal current | 500 mA |
| Nominal voltage | 125 V |
| Number | 1 piece |
| Suitable for measurement device types | MX 57EX |
This fuse from Chauvin Arnoux is specifically designed for use in measuring instruments of type MX 57EX. It serves as a protective component in the electrical system of the device and prevents damage caused by excessive current. With a rated current of 500 mA and a rated voltage of 125 V, it is tailored to the operating conditions of the MX 57EX. The compact dimensions of 5 x 20 mm allow for easy and precise installation in the designated fuse holder of the device.
Fuse is the central component here, interrupting the circuit in the event of an overcurrent fault to protect the device. The
rated voltage of 125 V defines the maximum voltage level at which the fuse operates safely. The
rated current of 500 mA indicates the current value considered normal operation; if this value is exceeded, the fuse will trip. The
dimensions of 5 x 20 mm correspond to a standard format for small fuses, commonly used in many measuring instruments.
Applications are clearly defined: This fuse is exclusively intended for use in the measuring instrument MX 57EX. It is not suitable for other devices or applications, as the electrical and mechanical requirements are specifically adapted to the MX 57EX. Using it in other devices may lead to malfunctions or damage.
Functions and equipment in detail include the specified electrical values as well as the mechanical fit. The fuse is supplied as a single unit and serves as a replacement part. Its design ensures that it reliably and securely interrupts the circuit when the rated current is exceeded, without failing or burning out.
Technology explained simply means that the fuse functions as a protective switch in the circuit. When the current exceeds 500 mA, the fuse wire melts and interrupts the current flow. This prevents the measuring instrument from being damaged by excessive current load. The rated voltage of 125 V ensures that the fuse remains stable even during voltage fluctuations within this range.
The fuse is not part of a set or series, but is a single replacement part. Use in other devices is not intended and not recommended.
Mounting and installation are carried out by inserting the fuse into the designated fuse holder of the MX 57EX. The dimensions of 5 x 20 mm ensure a secure fit. No additional tools or mounting aids are required. The fuse is simply inserted into the holder and is immediately ready for use.
Advantages in operation lie in its reliability and specific adaptation to the MX 57EX. The fuse protects the device from overcurrent, extending the device’s service life and enhancing operational safety. The compact design allows for easy handling and replacement.