General
Material	Polyisobutylene
Colour	Black
Thickness	0,75 mm
Property	self-welding
Purpose	waterproof protection for cables and components

The product is a sealing tape of the brand Cellpack, type No. 62, with dimensions 0.75 mm thickness, 19 mm width, and a length of 10 meters. It is a black-colored tape made of polyisobutylene, which is self-sealing and specifically designed for waterproof protection of cables and electrical components. The application is in the field of cable installation, particularly for sealing cables against moisture, water, and other environmental influences. The tape is used in electrical and energy technology, where reliable insulation and sealing are required, for example, when connecting cables in outdoor installations or sealing cable entries.

Sealing tape made of polyisobutylene is characterized by its high elasticity and chemical resistance. It bonds automatically at cut edges, creating a tight, waterproof connection. This property makes it particularly suitable for use in damp or wet environments, where permanent sealing is necessary. The material is flexible and can be easily wrapped around cables or other round or irregular surfaces, adapting to the shape and forming a homogeneous layer.

Self-sealing means that the tape forms a tight connection at the cut edges without additional adhesives or joining methods. This reduces the risk of leaks and increases the reliability of the seal. The self-sealing occurs due to the physical properties of polyisobutylene, which triggers a chemical reaction when in contact with itself, forming a firm bond.

Waterproof protection is the primary purpose of this product. It is used to protect cables and electrical components from moisture, dampness, and water, which is especially important in outdoor installations, underground installations, or in damp indoor areas. The sealing prevents corrosion, short circuits, and other damages caused by moisture. The tape is suitable for use in electrical installation and in high-voltage technology, where high insulation performance is required.

Compatibility and accessories includes use with other products used in cable sealing. As suitable accessories, the Scotch 23 tape (19 mm x 9.15 m x 0.76 mm, black, made of ethylene-propylene rubber) is specified. This tape can be used additionally or alternatively, depending on installation requirements. Combining both tapes may be beneficial for more complex sealing tasks, especially when sealing different materials or surfaces.

Installation and mounting is done by simply wrapping the cable or component. The tape is wound in multiple layers, with the cut edges overlapping and forming a tight connection through self-sealing. No additional adhesives or tools are required. The application is done at room temperature, and the tape hardens after a short time. Installation is quick and does not require special training, although instructions for correct application should be followed to ensure optimal sealing.

The product is categorized under resin and cable glands within the cable connection fittings category. It serves as a waterproof sealing tape and is specifically designed for use in electrical and energy technology. Its use typically occurs during cable installation, especially in outdoor areas or in installations exposed to high humidity. The tape is not intended for use in explosive environments, unless explicitly stated in technical documentation, which is not the case here.

Polyisobutylene is a synthetic polymer known for its high elasticity, chemical resistance, and resistance to moisture. It is commonly used in industry for sealing and insulation applications.

The technical data of the product include dimensions (thickness 0.75 mm, width 19 mm, length 10 m) and material description (polyisobutylene, black, self-sealing). The information on use and function is based exclusively on the provided sources and is presented factually correctly.

The product is suitable for use in electrical installation and cable connection technology. It is commonly used in practice for sealing cables in outdoor installations, sealing cable entries, or insulating electrical components. The application is done by simple wrapping, with self-sealing ensuring a tight, waterproof connection. The use is simple and does not require special tools or additional materials.

The term high voltage refers here to the application area in high-voltage technology, not to a specific electrical voltage that the tape can withstand.

The use of the tape typically occurs during cable installation, especially in damp or wet environments. It is not intended for use in explosive environments, unless explicitly stated in technical documentation, which is not the case here. The application is done at room temperature, and the tape hardens after a short time. Installation is quick and does not require special training, although instructions for correct application should be followed to ensure optimal sealing.

The product is categorized under resin and cable glands within the cable connection fittings category. It serves as a waterproof sealing tape and is specifically designed for use in electrical and energy technology. Its use typically occurs during cable installation, especially in outdoor areas or in installations exposed to high humidity. The tape is not intended for use in explosive environments, unless explicitly stated in technical documentation, which is not the case here.

Sealing tape made of polyisobutylene is characterized by its high elasticity and chemical resistance. It bonds automatically at cut edges, creating a tight, waterproof connection. This property makes it particularly suitable for use in damp or wet environments, where permanent sealing is necessary. The material is flexible and can be easily wrapped around cables or other round or irregular surfaces, adapting to the shape and forming a homogeneous layer.

Self-sealing means that the tape forms a tight connection at the cut edges without additional adhesives or joining methods. This reduces the risk of leaks and increases the reliability of the seal. The self-sealing occurs due to the physical properties of polyisobutylene, which triggers a chemical reaction when in contact with itself, forming a firm bond.

Waterproof protection is the primary purpose of this product. It is used to protect cables and electrical components from moisture, dampness, and water, which is especially important in outdoor installations, underground installations, or in damp indoor areas. The sealing prevents corrosion, short circuits, and other damages caused by moisture. The tape is suitable for use in electronics and energy technology, where high insulation performance is required.

Compatibility and accessories includes use with other products used in cable sealing. As suitable accessories, the Scotch 23 tape (19 mm x 9.15 m x 0.76 mm, black, made of ethylene-propylene rubber) is specified. This tape can be used additionally or alternatively, depending on installation requirements. Combining both tapes may be beneficial for more complex sealing tasks, especially when sealing different materials or surfaces.

Installation and mounting is done by simply wrapping the cable or component. The tape is wound in multiple layers, with the cut edges overlapping and forming a tight connection through self-sealing. No additional adhesives or tools are required. The application is done at room temperature, and the tape hardens after a short time. Installation is quick and does not require special training, although instructions for correct application should be followed to ensure optimal sealing.

Polyisobutylene is a synthetic polymer known for its high elasticity, chemical resistance, and resistance to moisture. It is commonly used in industry for sealing and insulation applications.

The technical data of the product include dimensions (thickness 0.75 mm, width 19 mm, length 10 m) and material description (polyisobutylene, black, self-sealing). The information on use and function is based exclusively on the provided sources and is presented factually correctly.

The product is suitable for use in electrical installation and cable connection technology. It is commonly used in practice for sealing cables in outdoor installations, sealing cable entries, or insulating electrical components. The application is done by simple wrapping, with self-sealing ensuring a tight, waterproof connection. The use is simple and does not require special tools or additional materials.

The term high voltage refers here to the application area in high-voltage technology, not to a specific electrical voltage that the tape can withstand.

The use of the tape typically occurs during cable installation, especially in damp or wet environments. It is not intended for use in explosive environments, unless explicitly stated in technical documentation, which is not the case here. The application is done at room temperature, and the tape hardens after a short time. Installation is quick and does not require special training, although instructions for correct application should be followed to ensure optimal sealing.