| General |
| Cable diameter | 8-35 mm |
| Max. number of cores | 10 piece |
| Core cross section | 0,8 mm² |
| Compatibility | telecommunication cable with PVC/PE insulation and layer sheath |
| Core connector compatibility | AVS 2-9, UY2 yellow, AVS 3-9, UR2 red |
| Max. number of cores per cross-section | 30/20/10 for 0.4/0.6/0.8 mm² |
The Cellpack connection branch sleeve SMHF 43-8/330 is a specific component for connecting and creating cable branches in telecommunication cables. It provides a secure and durable connection for cables with PVC and PE insulation, featuring a layered outer sheath, for example, types such as A-2YF(L)2Y, A-02YSF(L)2Y, A-PWE2Y, A-PM, A-PM2Y, or A-PMbc. The sleeve is designed for use in various environments, including indoor, outdoor, in the ground, and underwater. It enables both direct cable connections and the creation of branches, and is suitable for both cut and uncut cables.
Applications
The sleeve is used in the fields of telecommunication and signaling technology, where reliable and weather-resistant connections of telecommunication cables are required. It is particularly suitable for installations in building and outdoor cabling technology, where cable connections must remain stable under various environmental conditions—such as moisture, temperature fluctuations, or mechanical stress. Use in underground and underwater installations requires high mechanical strength and chemical resistance, which is ensured by the sleeve’s construction.
Functions and Equipment in Detail
The SMHF 43-8/330 is designed as a shrink technology, meaning it shrinks onto the cable when heated, creating a tight, waterproof connection. The sleeve is designed for cables with a diameter of 8 to 35 mm. The conductors are connected via wire connectors, and the sleeve is designed for use with wire connector systems up to 10 conductors with a cross-section of 0.8 mm². The specification “spliced with wire connectors 0.4 / 0.6 / 0.8: 30/20/10” refers to the maximum number of conductors that can be connected at the respective cross-sections—30 conductors at 0.4 mm², 20 conductors at 0.6 mm², and 10 conductors at 0.8 mm².
Technology Explained Simply
The shrink technology ensures that the sleeve tightly conforms to the cable after heating, creating a mechanically stable and electrically insulating connection. The use of wire connectors enables a secure electrical connection of individual conductors, while the sleeve protects the entire connection from external influences such as moisture, dust, or mechanical stress. The design ensures that the sleeve maintains its function even under long-term stress in underground or underwater environments.
Compatibility and Accessories
The sleeve is specifically designed for telecommunication cables with PVC and PE insulation and a layered outer sheath. Suitable accessories include wire connectors such as the AVS 2-9 for 2 conductors, the UY2 yellow for 2 conductors with a cross-section of 0.4–0.9 mm², the AVS 3-9 for up to 3 conductors in the same cross-section, and the UR2 red for 3 conductors. These connectors are intended for connecting individual conductors within the sleeve and ensure a secure electrical connection.
Installation and Mounting
Installation involves placing the sleeve onto the cable, with cable ends prepared according to requirements. After inserting the wire connectors, the sleeve is activated by heat (e.g., using a heat gun), causing it to shrink and form a tight connection. The exact installation instructions can be found in the manufacturer’s technical documentation or specialist literature. The sleeve is suitable for use in various installation scenarios, including cable shafts, underground, or underwater.
Advantages in Operation
Using the SMHF 43-8/330 provides high reliability in connecting telecommunication cables. The shrink technology ensures a durable, waterproof, and mechanically stable connection that functions even under difficult environmental conditions. Compatibility with various wire connector systems allows for flexible application, and suitability for different installation scenarios makes the sleeve a universally applicable component in cabling technology. The sleeve is designed for use indoors and outdoors, in the ground, and underwater, increasing its versatility.