| General |
| Maximum data rate | 1800 Mbit/s |
| Frequency bands | 2.4 GHz and 5 GHz |
| MIMO configuration | 2x2 |
| Data rate 2.4 GHz | 574 Mbit/s |
| Data rate 5 GHz | 1201 Mbit/s |
| Ethernet ports | 1x 2.5 GbE PoE at + 1x 1 GbE |
| Current supply | PoE at |
| Power consumption | 18 W |
| Operating modes | Standalone, on Premise, Cloud Managed |
The Cambium Networks XV2-2X00B00-EU is an indoor access point of the Wi-Fi 6 generation, designed for use in indoor environments with high requirements for network performance and reliability. The device supports the IEEE 802.11ax standards and offers a maximum data rate of up to 1800 Mbit/s, divided into 574 Mbit/s in the 2.4-GHz band and 1201 Mbit/s in the 5-GHz band. Configuration is performed using 2x2 MIMO technology, enabling efficient use of available frequency bands. The device is designed for operation in standalone mode, on-premise, or in a cloud-managed environment, making it suitable for various network architectures in enterprises, schools, or public institutions.
Indoor access point
This access point is specifically designed for use in enclosed spaces. Installation is carried out via a network cable, with power supplied through PoE (Power over Ethernet).
Functions and equipment in detail
The device features two Ethernet ports: one 2.5-Gigabit Ethernet port with PoE at (Power over Ethernet, Active) and one 1-Gigabit Ethernet port. The PoE at port enables power delivery via the network cable, eliminating the need for a separate power supply. Maximum power consumption is 18 W. The network ports are intended for connection to switches, routers, or other network devices. Wi-Fi 6 technology (IEEE 802.11ax) ensures higher network efficiency, especially with many simultaneous devices, through improved channel utilization and reduced latency.
Technology explained simply
The 2x2 MIMO technology means the device has two transmit and two receive antennas, increasing data rate and signal quality. The 2.4 GHz and 5 GHz frequency bands are used in parallel, with the 5 GHz band providing higher speeds and less interference. PoE at technology allows power delivery via the network cable, making installation more flexible and reducing cable clutter. The maximum power consumption of 18 W is typical for access points of this performance class.
Compatibility and accessories
The access point is designed for use in existing network infrastructures that support PoE. Compatibility with cloud management systems enables centralized control and monitoring of multiple devices.
Mounting and installation
Installation requires a network cable connected to the 2.5-GbE PoE port. Power is supplied via PoE, so a PoE-capable switch or a PoE injector is required.
Advantages in operation
The use of the Cambium Networks XV2-2X00B00-EU provides high network performance in indoor environments, especially with many simultaneous users. Wi-Fi 6 technology ensures efficient use of frequency bands and reduces latency. Support for multiple operating modes offers flexibility in network design. The maximum power consumption of 18 W is typical for access points of this performance class and suitable for most network infrastructures.