Freely programmable touch panel with a 4-inch IPS screen with a resolution of 480x480, which enables control and monitoring of the free@home or KNX system.
Control, monitor and manage your entire installation on one device:
switching - dimming - slider - blind - RGBW control element - step switch - scene switch - display element - audio control element.
The display contains a brightness and proximity sensor.
Operation is supported with haptic feedback.
The display contains an integrated temperature controller (RTC) with integrated temperature sensor.
A remote sensor (e.g. 6226/T / PT1000) for temperature detection can optionally be connected to the rear input.
An additional 24 VDC power supply (e.g. 6358-101) is required for operation.
KNX:
Up to 12 operating pages can be created.
A maximum of 4 touch surfaces are possible per page.
A maximum of 12 operating functions in total per device.
10 scene actuators, 10 logic functions, 10 presence simulations and time programs,
18 fault and alarm messages.
The primary function enables the direct operation of a function when touching the display.
The rear input can also be used as a binary input as an alternative to the remote sensor
free@home:
Up to 16 operating functions can be created on up to 4 pages.
A maximum of 4 touch surfaces are possible per page.
The scene function, logic functions, presence simulation and time programs are provided in free@home by the System Access Point and are not required in the display.
Fault and alarm messages are displayed as a 'pop up'.
The rear input can be used to connect a remote sensor (e.g. 6226/T / PT1000)