Busch Jaeger 2CKA006800A2986, EAN: 4011395295144

Busch Jaeger 64762 UJ-914 motion sensor

Security Technology > Sensors > Motion Detectors

Busch Jaeger 64762 UJ-914 motion sensor

Lieske Part No. 104835
Mfg Part No 2CKA006800A2986
EAN-Code 4011395295144
Manufacturer Busch Jaeger
Here only 167,20 EUR
198,97 EUR incl. VAT

Further information for Busch Jaeger 64762 UJ-914 motion sensor

General
ModelMovement sensor
Scan angle180
Optimum mounting height1.1
Mounting methodFlush mounted (plaster)
Connection typeOther
MaterialPlastic
Material qualityThermoplastic
Surface protectionUntreated
Surface finishingGlossy
ColourWhite
RAL-number (akin)9010
Degree of protection (IP)IP20
Voltage typeAC
Frequency50
Min. switch-on time10
Max. duty cycle30
Detection angle horizontal180
Response value luminosity500
Width100
Height90
Depth180
Built-in depth25
Built-in length25
Min. depth of built-in installation box25
Ambient temperature45
Nominal voltage230
Constant light controlyes
HVAC-controlyes
Forced switch onyes
Forced switch offyes
Animal zoneyes
Creep-under protectionyes
Networkableyes
Staircase monitoringyes
Bridging switchyes
Suitable for wireless transmissionyes
Remote operationyes
With remote controlyes
Response value sensitivity adjustableyes
Response value luminosity adjustableyes
With signal unityes
Teach-function for response value luminosityyes
Suitable for ceiling mountingyes
Dim function with dimmer basic elementyes
Halogen freeyes
Antibacterial treatmentyes
Transparentyes
Substation inputyes
With alarm functionyes
IFTTT support availableyes
Wall mountingyes
The Busch Jaeger motion detector type 64762 UJ-914 is a ready-to-install set for flush mounting, consisting of the Busch-Wächter® 180 flex comfort sensor with Select lens, a flex 1-way relay insert, and the Busch-balance SI 1-way cover frame. The device is part of the Busch-flexTronics® product series and corresponds to the Busch-balance® SI design line. It is intended for the automatic control of lighting systems in indoor spaces, particularly in corridors, stairwells, and other areas where energy-saving and user-friendly lighting control is required.

Applications

The motion detector is specifically designed for indoor use and is particularly suitable for stairwells, corridors, entrance areas, and other areas with low usage density. The integrated stairwell monitoring enables efficient lighting control across multiple levels. Installation is carried out flush with the wall, complying with the installation guidelines of DIN 49073 Part 1. The optimal mounting height is 1.1 meters, with a horizontal detection angle of 180 degrees. Range specifications refer to an ambient temperature of 21 °C.

Functions and equipment in detail

The device features constant light regulation, ensuring uniform brightness in the room regardless of time of day or external lighting conditions. The HVAC control enables the operation of heating, ventilation, and air conditioning systems. Forced on/off switching is also integrated, allowing the lighting to be activated or deactivated independently of motion detection. The animal exclusion zone prevents false alarms caused by small animals, while the under-crawling protection and rear field monitoring prevent detection of movements below or behind the device. The sensitivity and light level threshold are adjustable, with the latter being adjustable via a teach function. The default light level threshold is 500 Lux.

Technology explained simply

The motion detector operates using infrared sensor technology, detecting movements within the detection area. The integrated signal unit enables the display of status information. The dimming function is compatible with a dimming insert, allowing for gentle brightness adjustment. The minimum on-time is 10 seconds, and the maximum on-time is 30 seconds. Power supply is via AC 230 V, with a frequency of 50 Hz. The ambient temperature must not exceed 45 °C. The protection rating IP20 safeguards against contact with foreign objects larger than 12.5 mm and against dripping water, but is not suitable for outdoor use.

Compatibility and accessories

The device is networkable and suitable for wireless transmission, allowing integration into existing smart home systems. IFTTT support enables connection to external services. A secondary station input is available, enabling additional control options via a secondary station flex insert (item 64891 U). Remote control is provided, with the remote control included in the delivery scope.

Installation and mounting

Installation is carried out flush in standard device boxes according to DIN 49073 Part 1. The installation depth is 25 mm, and the installation length is also 25 mm. The minimum depth of the device box must be 25 mm. Wall mounting is possible, as is ceiling mounting. The device is made of thermoplastic, halogen-free, and features a glossy, untreated surface in white (similar to RAL 9010). An antibacterial treatment is integrated. Dimensions are 100 mm width, 90 mm height, and 180 mm depth.

Operational advantages

The motion detector reduces energy consumption by automatically switching off lighting when no one is present. The adjustable parameters allow individual adaptation to different rooms and usage scenarios. The integrated bypass function enables bypass control, for example, to keep lighting active when a person leaves the room. The combination of relay insert and cover frame ensures a clean and professional installation that visually integrates into the environment. Remote control and network capability expand control options and enable centralized control over multiple devices.

Final assembly

The device is delivered in a set packaging containing all necessary components for installation: the sensor, relay insert, and cover frame. The surface is transparent, facilitating visual integration into the environment. The material quality is thermoplastic, halogen-free, and antibacterially treated. The color is white, corresponding to RAL 9010. The protection rating IP20 is suitable for indoor use, not for outdoor use.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/104835
qrcode für Busch Jaeger 64762 UJ-914 motion sensor