Busch Jaeger 2CKA006800A2950, EAN: 4011395295014

Busch Jaeger 2CKA006800A2950 motion sensor 64761 UJ-84

Security Technology > Sensors > Motion Detectors

Busch Jaeger 2CKA006800A2950 motion sensor 64761 UJ-84

Lieske Part No. 104749
Mfg Part No 2CKA006800A2950
EAN-Code 4011395295014
Manufacturer Busch Jaeger
Here only 144,40 EUR
171,84 EUR incl. VAT

Further information for Busch Jaeger 2CKA006800A2950 motion sensor 64761 UJ-84

General
ModelMovement sensor
Scan angle180
Mounting methodFlush mounted (plaster)
Connection typeOther
MaterialPlastic
Material qualityThermoplastic
Surface protectionUntreated
Surface finishingGlossy
ColourWhite
RAL-number (akin)9016
Degree of protection (IP)IP20
Voltage typeAC
Frequency50
Min. switch-on time10
Max. duty cycle30
Detection angle horizontal180
Response value luminosity500
Width80
Height80
Depth48
Built-in depth25
Built-in length25
Min. depth of built-in installation box25
Ambient temperature45
Nominal voltage230
Constant light controlyes
HVAC-controlyes
Forced switch onyes
Forced switch offyes
Animal zoneyes
Creep-under protectionyes
Networkableyes
Staircase monitoringyes
Bridging switchyes
Suitable for wireless transmissionyes
Remote operationyes
With remote controlyes
Response value sensitivity adjustableyes
Response value luminosity adjustableyes
With signal unityes
Teach-function for response value luminosityyes
Suitable for ceiling mountingyes
Dim function with dimmer basic elementyes
Halogen freeyes
Antibacterial treatmentyes
Transparentyes
Substation inputyes
With alarm functionyes
IFTTT support availableyes
Wall mountingyes
The Busch Jaeger motion sensor type 64761 UJ-84 is a ready-to-install device for flush mounting, offered in the product range Busch-flexTronics® and the design line future® linear. It is a motion sensor with integrated relay insert and cover frame, designed for the automatic control of lighting systems in indoor environments. The set includes the Busch-Wächter® 180 flex Basic sensor (64761-84), the flex 1-way relay insert (64811 U), and the future® linear 1-way cover frame (1721-184K). Installation is exclusively in standard flush-mounted device boxes according to DIN 49073 part 1, requiring a minimum depth of 25 mm.

Applications

The sensor is suitable for use in residential and commercial rooms, particularly in corridors, stairwells, and other areas where automatic lighting control is desired. The stairwell monitoring function enables safe and energy-efficient lighting in multi-storey buildings. The animal detection zone and under-crawl protection/rear field monitoring ensure that small animals or movements in the lower part of the detection area do not trigger false activations. The constant light regulation ensures uniform brightness, regardless of ambient lighting.

Functions and equipment in detail

The motion sensor features an activation sensitivity that is manually adjustable, as well as an activation brightness level that can be adjusted via a teach function. The forced on and forced off functions allow manual control of the device, even when no motion is detected. The dimming function is usable in conjunction with a dimming insert. A bypass switch allows the lighting to be operated independently of the sensor. The alarm function can be used for security applications.

Technology explained simply

The sensor detects motion within a horizontal angle of 180 degrees, providing broad coverage of the room. The horizontal detection angle of 180° ensures comprehensive monitoring, especially in long corridors. The minimum on-time is 10 seconds, the maximum on-time is 30 seconds, allowing flexible adaptation to different usage scenarios. The rated voltage is 230 V AC, meaning the operating voltage is designed for use in public power grids. The ambient temperature of 45 °C indicates the maximum operating temperature. The protection rating IP20 means the device is protected against contact with fingers, but is not suitable for outdoor use. The white colour corresponds approximately to RAL number 9016; the surface is glossy and uncoated, made of halogen-free thermoplastic. An antibacterial treatment is integrated, improving hygiene in the application area.

Compatibility and accessories

The device is networkable and suitable for wireless transmission, enabling integration into intelligent building control systems. Remote control capability is supported by the integrated remote control. As suitable accessories, the 64891 U auxiliary station insert flex is offered, which can be used to extend control functions. IFTTT support enables connection to external services for automated workflows.

Installation and mounting

Installation is for flush-mounted installations. The mounting depth is 25 mm, and the mounting length is also 25 mm. The device box must be at least 25 mm deep. Mounting is intended for both ceiling mounting and wall mounting. The cover is transparent, facilitating optical integration into room design.

Advantages in operation

The combination of HVAC control, constant light regulation, and dimming function enables energy-efficient and comfortable use. The adjustable parameters such as activation brightness and sensitivity ensure functionality adapted to the respective environment. The antibacterial treatment and halogen-free material quality increase the service life and safety of the device. The remote control capability and networkability expand application possibilities in modern building automation systems.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/104749
qrcode für Busch Jaeger 2CKA006800A2950 motion sensor 64761 UJ-84