General
Model	Presence detector
Scan angle	360
Optimum mounting height	2
Max. transmission range sideways	6
Max. transmission range frontally	6
Mounting method	Other
Material	Plastic
Material quality	Thermoplastic
Surface protection	Untreated
Surface finishing	Matt
Colour	White
RAL-number (akin)	9016
Degree of protection (IP)	IP40
Voltage type	AC
Frequency	60
Min. switch-on time	60
Max. duty cycle	30
Detection angle horizontal	360
Pivoting range sensor, horizontal	0
Pivoting range sensor, vertical	0
Response value luminosity	2000
Number of switching zones	640
Width	94
Height	94
Depth	76
Built-in depth	49
Built-in length	49
Built-in diameter	68
Min. depth of built-in installation box	49
Ambient temperature	45
Nominal voltage	230
Constant light control
HVAC-control
Forced switch on
Forced switch off
Animal zone
Creep-under protection
Networkable
Staircase monitoring
Bridging switch
Suitable for wireless transmission
Remote operation
With remote control
Response value sensitivity adjustable
Response value luminosity adjustable
With signal unit
Teach-function for response value luminosity
Suitable for ceiling mounting
Dim function with dimmer basic element
Halogen free
Antibacterial treatment
Transparent
Substation input
With alarm function
IFTTT support available
Wall mounting

Presence detector with mixed light measurement.
For brightness and motion-dependent switching of lighting.
With high-load relay for LED operation.
Detection range (at 3 m installation height): rectangular Walking people: across the detector 24 mx 3 m, frontal/lengthwise to the detector 14 mx 3 m.
Extension of the detection range through extension combination.
Installation height 27 mm.
For semi- and fully automatic operation.
Additional on/off option via button input.
With continuous light / continuous off function (8 hours), can be activated via intelligent extension input.
With brightness-independent test mode for evaluating the detection range.
With teach-in function of the brightness switching threshold, IR service handheld transmitter required.
With detection display in test mode.
Ceiling mounting via integrated spring bracket.
Anti-twist protection via additional quick clamping. Adjustment elements accessible from the front.
Monitoring density: 92 sectors with 368 switching segments
Switch-off delay: approx. 1 min. - 30 min. or short-term pulse adjustable.
Remote control via IR service handheld transmitter 6843.
Suitable for suspended ceilings with a panel thickness of 9 to 25 mm.
Installation hole size: Ø 68 mm.
When used in conjunction with a relay/contactor, an RC extinguishing element item no. 6899 must be provided.
Recommendation: HaloX® 100 from Kaiser (item no. 1281-00) with corresponding cover (1281-01 or 1281-61 for exposed concrete) or IBTronic H120-68 from Spelsberg