General
Other bus systems	DALI
Model	Presence detector
Mounting method	Other
Material	Plastic
Material quality	Thermoplastic
Surface protection	Untreated
Surface finishing	Matt
Colour	White
RAL-number (akin)	9016
Optimum mounting height	2
Max. transmission range sideways	6
Max. transmission range frontally	6
Detection angle horizontal	360
Min. switch-on time	60
Max. duty cycle	30
Min. depth of built-in installation box	49
Built-in depth	49
Built-in diameter	68
Built-in length	49
Depth	72
Height	94
Width	94
Bus system KNX
Bus system KNX radio
Bus system radio frequent
Bus system LON
Bus system Powernet
Transparent
Bus connection included
Substation input
Creep-under protection
Animal zone
Staircase monitoring
Response value luminosity adjustable
Teach-function for response value luminosity
Suitable for ceiling mounting
Wall mounting

DALI extension presence detectors
to extend the detection range of DALI presence detectors.
Current consumption on the DALI bus: max. 10 mA, corresponds to approx. 5 DALI operating devices.
Communication with the DALI main device takes place via the DALI interface.
Detection range (at a mounting height of 3 m): circular: seated people: up to Ø 10 m, walking people: up to Ø 12 m. Installation height 23 mm.
Ceiling installation via integrated spring clip.
Anti-twist protection via additional quick-release clamp.
Monitoring density: 72 sectors with 640 switching segments.
Suitable for suspended ceilings with a panel thickness of 9 to 25 mm.
Installation hole size: Ø 68 mm.
For physical reasons, the detection range is smaller when approaching centrally.
Recommendation: HaloX® 100 from Kaiser (Art. No. 1281-00) with appropriate cover (1281-01 or 1281-61 for exposed concrete) or IBTronic H120-68 from Spelsberg