General
Model	Presence detector
Scan angle	360
Optimum mounting height	2
Max. transmission range sideways	6
Max. transmission range frontally	6
Mounting method	Other
Material	Plastic
Material quality	Thermoplastic
Surface protection	Untreated
Surface finishing	Matt
Colour	White
RAL-number (akin)	9016
Degree of protection (IP)	IP40
Voltage type	AC
Frequency	60
Detection angle horizontal	360
Pivoting range sensor, horizontal	0
Pivoting range sensor, vertical	0
Response value luminosity	2000
Number of switching zones	368
Width	94
Height	94
Depth	76
Built-in depth	49
Built-in length	49
Built-in diameter	68
Min. depth of built-in installation box	49
Ambient temperature	45
Nominal voltage	230
Constant light control
HVAC-control
Forced switch on
Forced switch off
Animal zone
Creep-under protection
Networkable
Staircase monitoring
Bridging switch
Suitable for wireless transmission
Remote operation
With remote control
Response value sensitivity adjustable
Response value luminosity adjustable
With signal unit
Teach-function for response value luminosity
Suitable for ceiling mounting
Dim function with dimmer basic element
Halogen free
Antibacterial treatment
Transparent
Substation input
With alarm function
IFTTT support available
Wall mounting

Slave presence detector to extend the detection range of master presence detectors. Detection range (at 3 m installation height): rectangular Walking people: across the detector 24 mx 3 m, frontal/lengthwise to the detector 14 mx 3 m. Installation height 27 mm. Ceiling installation via integrated spring clip. Anti-twist protection via additional quick-clamping. Monitoring density: 92 sectors with 368 switching segments. Suitable for suspended ceilings with a panel thickness of 9 to 25 mm. Installation hole size: Ø 68 mm. Recommendation: HaloX® 100 from Kaiser (item no. 1281-00) with corresponding cover (1281-01 or 1281-61 for exposed concrete) or IBTronic H120-68 from Spelsberg