General
Other bus systems	DALI
Model	Presence detector
Mounting method	Other
Material	Plastic
Material quality	Thermoplastic
Surface protection	Untreated
Surface finishing	Matt
Colour	White
RAL-number (akin)	9016
Optimum mounting height	2
Max. transmission range sideways	6
Max. transmission range frontally	6
Detection angle horizontal	360
Min. switch-on time	60
Max. duty cycle	30
Min. depth of built-in installation box	60
Built-in depth	60
Built-in diameter	68
Built-in length	60
Depth	87
Height	94
Width	94
Bus system KNX
Bus system KNX radio
Bus system radio frequent
Bus system LON
Bus system Powernet
Transparent
Bus connection included
Substation input
Creep-under protection
Animal zone
Staircase monitoring
Response value luminosity adjustable
Teach-function for response value luminosity
Suitable for ceiling mounting
Wall mounting

Presence detector with mixed light measurement.
For brightness and motion-dependent control and switching of DALI operating devices.
For DALI broadcast operation (central telegram).
Supplies the necessary power for additional DALI operating and control devices.
Suitable for up to 45 DALI operating devices.
For changing the color temperature of >tunable white< luminaires/lamps that comply with the DALI standard IEC 62386-209 (Device Type 8).
Color temperature can then be set between 2,700 K - 6,500 K.
With additional switching output for HVAC control or for switching additional consumers (e.g. blackboard light).
Can be configured to completely switch off the DALI operating devices.
With Bluetooth interface for parameterization and operation.
Adjustment of all setting options via smartphone or tablet.
Light control via smartphone or tablet app.
Detection area (at 3 m installation height): rectangular Walking people: across the detector 30 mx 3 m, frontally 20 mx 3 m. Extension of the detection area through master/slave combination. Installation height 27 mm. For semi-automatic, comfort and fully automatic operation. Additional on/off option via button input.
With permanent light / permanent off function (8 hours), can be activated via intelligent extension input.
With timer-controlled basic lighting function.
With selectable burn-in function for fluorescent lamps.
With 2-stage automatic switch-off (according to EnEV / EN 15232).
With timer-controlled night glare protection function.
With selectable presence simulation when not present.
With integrated storage of the duty cycle (energy monitor).
With brightness-independent test mode for evaluating the detection area.
With detection display in test mode.
Ceiling mounting via integrated spring bracket.
Anti-twist protection via additional quick clamping.
Adjustment elements accessible from the front.
Monitoring density: 92 sectors with 368 switching segments.
Individual switching off and sensitivity adjustment of individual sensors possible.
Switch-off delay: adjustable from approx. 1 min. - 30 min.
With selectable dynamic switch-off delay.
Suitable for suspended ceilings with a panel thickness of 9 to 25 mm.
Installation hole size: Ø 68 mm.
When used in conjunction with a relay/contactor, an RC suppressor, item no. 6899, must be provided.
Free app for IOS and Android available in the App Store or Play Store.
Recommendation: HaloX® 100 from Kaiser (Art. No. 1281-00) with appropriate cover (1281-01 or 1281-61 for exposed concrete) or IBTronic H120-68 from Spelsberg