Further information for Busch Jaeger 2CKA006599A2986 DALI-Power-Poti Broadcast Dimmer
General
Rated current
0.075
Nominal voltage
230
Min. depth of built-in installation box
28.5
Width of device
71
Height of device
71
Depth of device
51
Substation input
Light value memory
IFTTT support available
The Busch Jaeger 2117/11 U is a DALI-Power-Poti for broadcast operation, designed for controlling and switching up to 64 DALI-operated devices in accordance with the IEC 62386 standard. It is particularly suitable for applications with EVG and transformers that feature a DALI interface. The device includes a rotary actuator and a push-to-off button, making it suitable for both brightness control and complete switching off. An integrated DALI power supply provides power to connected devices and enables fail-safe setting of switch-on brightness and base brightness.
DALI-Technology is used here as the standard for digital control of lighting systems. The device operates with a DALI voltage of 15.5 V DC and can deliver a maximum output current of 75 mA. Power consumption is less than 2.5 W. The maximum number of controllable DALI-operated devices depends on the number of parallel-connected potentiometers: with a single active DALI-Poti, up to 37 devices are possible; with three parallel active DALI-Potis, up to 111 devices. The maximum DALI cable length is 300 metres with a cable cross-section of 1.5 to 2.5 mm².
Application areas include decentralised lighting control in buildings where central command transmission (central telegram) is required. The device is short-circuit-proof and overload-protected by an electronic fuse. In active operation, it supplies the necessary power for additional DALI-operated and control devices at mains voltage. In passive operation, i.e. without mains voltage, the potentiometer functions as an additional control point on the DALI bus.
Functions and equipment in detail include an LED orientation light, which is adjustable in 18 colours and remains visible even when switched off. Parallel connection is limited: up to five devices in passive operation and up to three in active operation. The device is not intended for use in combination with DALI sensors or central units from other manufacturers.
Technology explained simply shows that the DALI power supply is integrated into the device, simplifying installation and eliminating the need for a separate power supply. The electronic fuse protects the system against overloads and short circuits. The fail-safe setting of brightness values ensures that preset values are retained even after a power failure.
Compatibility and accessories include use with various design lines such as Plattform 63, Busch-Duro 2000® SI, Reflex SI, Busch-balance® SI, Busch-art linear®, future® linear, Busch-axcent®, solo®, pur edelstahl, carat®, Busch-dynasty®, alpha and impuls. Suitable frames include, for example, 2513-212 (3-way), 2514-212 (4-way) and 2512-212 (2-way) in white. Installation is carried out in a UP box according to DIN 49073.
Installation and mounting require the use of a suitable UP box with a minimum depth of 28.5 mm. The device itself has a width and height of 71 mm each and a depth of 51 mm. Mounting is done in standard in-line device format, with the mentioned frame components enabling integration into existing systems.
Operational advantages include easy integration into existing DALI systems, fail-safe storage of brightness values, and the ability to use the device as a control point even in passive operation. The integrated power supply reduces the number of required components and simplifies installation. The LED lighting supports orientation in the dark, ensuring operability even under low ambient lighting conditions. Parallel connection enables control of larger lighting systems without additional central units.