General
Assembly arrangement	Basic element with housing top
Number of modules (module system)	3
Type of load	Universal and LED Retrofit
Mounting method	Other
Type of fastening	Snapper mounting
Material	Plastic
Material quality	Thermoplastic
Surface protection	Untreated
Surface finishing	Matt
Colour	Grey
RAL-number (akin)	7035
Suitable for degree of protection (IP)	IP20
Impact strength	IK00
Nominal voltage	230
Control voltage	230
Width of device	53
Height of device	85
Depth of device	73
Halogen free
IFTTT support available

With rotary actuation, pressure sequence changeover switch and soft locking. Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Can be switched between leading and trailing edge phase control using a selector switch. Low noise thanks to the use of MOSFET transistors. Short-circuit proof and overload proof (electronic fuse). With adjustable minimum brightness. Nominal voltage: 230 V~, + 10 % / - 10 % Nominal frequency: 50 Hz/60 Hz Nominal power: 2 - 100 W/VA (retrofit LED loads). Nominal power: 10 - 250 W/VA (non-LED loads). For conventional transformers, take into account ~20% transformer losses. For electronic transformers, take into account ~5% transformer losses. Can also be used with alternating circuits.