With select lens for detection with animal paths. For automatic switching of Busch-free@home® actuators depending on movement and brightness. The actuator's run-on time can be programmed via the web interface of the system access point. For switching 127 V~/230 V~ consumers. With integrated switching actuator. Switching function is also available without prior programming (preconfigured). Configuration can be changed later via the web interface (groups, scenes, etc.). The bus connection is made via the included bus terminal. When installing in the flush-mounted box, ensure that there is a spatial separation between the bus and the 127 V/230 V installation cable! If the minimum distance is not met, use electronic boxes or insulating hoses, for example. Programming only when the bus voltage is applied via the web interface of the system access point. Further information on commissioning and operation can be found in the system manual and the online operating manual.