General
Other bus systems	free@home
Mounting method	Flush mounted (plaster)
Number of inputs	1
Switching current (resistive)	4
Max. switching power	920
Type of current	AC
Degree of protection (IP)	IP20
Min. depth of built-in installation box	32
Bus system KNX
Bus system KNX radio
Bus system radio frequent
Bus system LON
Bus system Powernet
Bus connection included
Bus module detachable
Local operation/hand operation

Sensor/blind actuator 2/1-way for Busch-free@home®.
For controlling blind or awning motors.
With integrated blind actuator.
Blind function is also available without prior programming (left sensor channel preconfigured).
Configuration can be changed later via the web interface (groups, scenes, etc.).
Right sensor channel for programming additional functions (groups, scenes, etc.).
For contacting 2-way rocker switches 6230-2x-xxx, 6231-2x-xxx, 6232-2x-xxx, 6233-2x-xxx and 6234-2x-xxx.
The bus connection is made via the included bus terminal.
When installing in the flush-mounted box, ensure that there is a spatial separation between the bus and the 127 V/230 V installation cable! If the minimum distance is not met, use electronic boxes or insulating hoses, for example.
Programming only possible when the bus voltage is applied via the web interface of the system access point.
Further information on commissioning and operation can be found in the system manual and the online operating manual.