Further information for Busch Jaeger 2CKA006220A0016 sensor/dimmer actuator 2/1-way
General
Other bus systems
free@home
Model
Dimming actuator
Mounting method
Flush mounted (plaster)
Number of outputs
1
Output power
180
Type of load
Universal and LED Retrofit
Voltage
230
Frequency
60
Degree of protection (IP)
IP20
Min. depth of built-in installation box
32
Bus system KNX
Bus system KNX radio
Bus system radio frequent
Bus system LON
Bus system Powernet
Bus connection included
Bus module detachable
Local operation/hand operation
The Sensor/Dimmer Actuator 2/1-way from Busch Jaeger, type 01.02.6212, is a flush-mounted device for the Busch-free@home® system. It is designed for controlling and dimming 230 V~ loads, particularly in intelligent building automation systems. The device features an integrated universal dimmer actuator that supports various load types including LEDs, incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Notably, compatibility with dimmable retrofit LED luminaires (LEDi) simplifies adaptation to existing lighting systems.
Applications
This dimmer actuator is designed for use in residential and commercial buildings where flexible and intelligent lighting control is required. It is particularly suitable for rooms with variable lighting demands, such as living rooms, bedrooms, offices, or conference rooms. Integration into the Busch-free@home® system enables central control via the web interface of the System Access Point, allowing control of groups, scenes, and other functions. The pre-configured dimming function on the left sensor channel ensures immediate usability without requiring prior programming.
Functions and Equipment in Detail
The device features two sensor channels. The left channel is pre-configured for dimming function by default, while the right channel can be programmed for additional functions such as group control or scene control. Configuration is performed via the web interface of the System Access Point, and programming is only possible when bus voltage is applied. Control is achieved using the included bus terminal, which enables connection to the Busch-free@home® network. Installation is flush-mounted, requiring a minimum depth of the device box of 32 mm.
Technology Explained Simply
The dimmer actuator operates with an output power of 180 VA and is designed for a voltage of 230 V and a frequency of 60 Hz. The load type is defined as universal and LED retrofit, meaning it supports both conventional and modern lighting technologies. The protection rating IP20 ensures protection against contact with fingers and against solid foreign objects, but not against water or dust—thus, the device is intended for indoor use. Spatial separation between the bus line and the 230 V installation wiring must be maintained during installation; if the minimum distance is not met, electronic boxes or insulating sleeves must be used to avoid interference.
Compatibility and Accessories
The dimmer actuator is compatible with various design lines of the Busch Jaeger product family, including Platform 63, Busch-balance® SI, Busch-Duro 2000® SI, Reflex SI, Busch-art linear®, future® linear, Busch-axcent®, solo®, pur edelstahl, carat®, and Busch-dynasty®. It can be connected with toggle switches of types 6230-2x-xxx, 6231-2x-xxx, 6232-2x-xxx, 6233-2x-xxx, and 6234-2x-xxx. As suitable accessories, the 2-way frame Busch-Duro 2100 SI white (article number 2512-212) is offered, enabling aesthetic integration into wall design.
Installation and Mounting
Installation is flush-mounted, requiring a minimum depth of the device box of 32 mm. The bus terminal, included in the delivery, is used to connect to the Busch-free@home® network. During cable routing, spatial separation between the bus line and the 230 V installation wiring must be maintained to avoid electromagnetic interference. If the distance is too small, additional measures such as electronic boxes or insulating sleeves are required.
Advantages in Operation
The dimmer actuator provides flexible and user-friendly control of lighting systems. The pre-configured dimming function enables immediate use, while subsequent programming via the web interface allows individual adaptation to specific requirements. Support for various load types, including LED retrofit solutions, increases application versatility. Integration into the Busch-free@home® system ensures central control and system scalability.